High pressure power steering pump?

towsey956

Well-Known Member

Posts

1,104

Location

Northyorkshire

• Sep 20, 2018

• #1

Hi all

I've got a 300 d1 98MY

My power steering is intermittently poo. Tyres not flat, joints in good condition, swivel bearings OK, column OK etc...basically I'm thinking it's the pump

My question, obviously, is is there a high pressure pump to be had?

Thanks

Towsey

 

jamesmartin

Well-Known Member

Posts

91,879

Location

louth lincs

• Sep 20, 2018

• #2

towsey956 said:

Hi all

I've got a 300 d1 98MY

My power steering is intermittently poo. Tyres not flat, joints in good condition, swivel bearings OK, column OK etc...basically I'm thinking it's the pump

My question, obviously, is is there a high pressure pump to be had?

Thanks

Towsey

Click to expand...

no and wouldnt be a good idea in any case

 

towsey956

Well-Known Member

Posts

1,104

Location

Northyorkshire

• Sep 20, 2018

• #3

Well I did wonder about that aswell, just thought an extra 10-20% would be nice to overcome the tyres and rtc damper spring if I fit it etc

 

flat

Well-Known Member

Posts

9,075

Location

Far away from you!!

• Sep 21, 2018

• #4

If it’s intermittently crappy then there is likely a fault, either in the box or the pump itself. The standard pump and box are more than man enough.

What are you symptoms?

 

towsey956

Well-Known Member

Posts

1,104

Location

Northyorkshire

• Sep 21, 2018

• #5

Yeah I know they're OK when rite but just thought it would add a bit of ease of driving for the missus mainly but me aswell

Just generally heavier sometimes, not notchy or anything just heavy, but no all the time

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

Posts

14,902

Location

Doncaster

• Sep 21, 2018

• #6

Racers sometimes use 'em when they swap to hydraulic steering, but bore the outlet out by 0.5mm .. apparently it's more than enough! However, that's moving a single double acting piston, via an orbital I believe, coupled directly to the steering arm on the hub, NOT via a Landrover steering box and multiple rods and connections.

Only passing info on, if you do it, it's your wallet ..

 

towsey956

Well-Known Member

Posts

1,104

Location

Northyorkshire

• Sep 21, 2018

• #7

Haha cheers and yeah that's about it...but no I'm really not that worried just thinking my pump might be on its way out and if there had been a direct replacement upgrade I might have jumped on board

 

NeilB

Active Member

Posts

214

Location

Ormskirk

• Sep 25, 2018

• #8

Have you changed the drive belt recently? When mine gets wet the power steering goes heavy while the belt slips for a second or two.......

 

Brown

Well-Known Member

Full Member

Posts

7,898

Location

East Midlands

• Sep 25, 2018

• #9

A new (standard) power steering pump transformed mine. I hadn't realised that things had been getting progressively heavier. Then one day on a trip to Derby it became almost impossible to turn and I got a new one. It was so light by comparison. That's with 265x75 tyres and an RTC damper too.

 

towsey956

Well-Known Member

Posts

1,104

Location

Northyorkshire

• Sep 25, 2018

• #10

Yeah belt is ok thanks, well it squeals when cold etc like normal but it drive pump ok.

Yeah well I've got 285 km's and have thought it will get an rtc damper if needs be. It's ok to drive, it's jumpstart not wot it was

One thing it does do is when turning fairly well into lock at low revs it does that sort of split second groan I've felt a few of them do and while having its split second groan the steering goes even stiffer but I don't know if it's pump or box?

Thanks

Towsey