200
Active Member
- Posts
- 939
- Location
- huddersfield
Made a tank guard last week and just fitted it today after getting it back from electro platers.
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 10,639
- Location
- Oxfordshire
lcbandit
Well-Known Member
- Posts
- 1,548
- Location
- west yorks
bought a winch bumper, seats, wading kit n extended bump stops!!!
200
Active Member
- Posts
- 939
- Location
- huddersfield
nrgserv
Well-Known Member
- Posts
- 4,208
- Location
- shipley, west yorks.
200
Active Member
- Posts
- 939
- Location
- huddersfield
Well you know how it is Neil 
Morning All!
My clutch keeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
Was going to replace the slave cylinder, and possible master as well (despite it being a TRW one and only being 6 months old), but I cant confirm which part is letting air in, there are no visible leaks on either, or along the hydrophilic lines. so its either leaking on the covered part of the slave cylinder, or the master cylinder is faulty and pushing air in.
I took it the garage where a friend stuck it on the ramp during his lunch and back bled the system, it was nice a firm for about a day then went soft on me again this morning.
Anyone know where to find some quality replacement parts, sick of cheep crap that breaks. I feel its more likely to be the slave cylinder playing up, when I replaced the master I didn't replace the slave, so its probable decided it wants a trip to the bin as well.
My clutch keeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
Was going to replace the slave cylinder, and possible master as well (despite it being a TRW one and only being 6 months old), but I cant confirm which part is letting air in, there are no visible leaks on either, or along the hydrophilic lines. so its either leaking on the covered part of the slave cylinder, or the master cylinder is faulty and pushing air in.
I took it the garage where a friend stuck it on the ramp during his lunch and back bled the system, it was nice a firm for about a day then went soft on me again this morning.
Anyone know where to find some quality replacement parts, sick of cheep crap that breaks. I feel its more likely to be the slave cylinder playing up, when I replaced the master I didn't replace the slave, so its probable decided it wants a trip to the bin as well.
- Posts
- 67,755
- Location
- halfway between here and there.
[QUOTE=a2dds;2912251]Morning All!
My cockkeeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
maybe visit your doctor.
My cockkeeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
maybe visit your doctor.
[QUOTE=a2dds;2912251]Morning All!
My cockkeeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
maybe visit your doctor.
ha ha ha :multiply:
- Posts
- 67,755
- Location
- halfway between here and there.
just jestin mate,too good to miss this one.:tea:
Please say you have something useful to say after getting my hopes up at the notification of a reply
- Posts
- 67,755
- Location
- halfway between here and there.
Please say you have something useful to say after getting my hopes up at the notification of a reply
ok,my cock is working great.is that any good.
try replacing the slave cylinder first as that is the cheaper option,if not that then change the master cyl.or change both then prob sorted.
Last edited:
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
Morning All!
My clutch keeps going soft on me, usually after not using it for a while, like a trip down the motorway. Think its air getting into the system, because the fluid level doesn't drop by much.
Was going to replace the slave cylinder, and possible master as well (despite it being a TRW one and only being 6 months old), but I cant confirm which part is letting air in, there are no visible leaks on either, or along the hydrophilic lines. so its either leaking on the covered part of the slave cylinder, or the master cylinder is faulty and pushing air in.
I took it the garage where a friend stuck it on the ramp during his lunch and back bled the system, it was nice a firm for about a day then went soft on me again this morning.
Anyone know where to find some quality replacement parts, sick of cheep crap that breaks. I feel its more likely to be the slave cylinder playing up, when I replaced the master I didn't replace the slave, so its probable decided it wants a trip to the bin as well.
possibly best to swp both ,but often faulty m/c seals show by splashing in res when pedals pumped
- Posts
- 67,755
- Location
- halfway between here and there.
mmm ok, did notice the fluid that came out was slightly silverl, like it metal swarf in it. bit odd I thought.
- Posts
- 67,755
- Location
- halfway between here and there.
Yea that'l do, I will take note
ok,please read addendum on my post.:tea:
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Have you checked all the pipework? Migh have a small hole
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
google 591231g and 550732g i found as good as you get ,but even so some faulty parts arent unkown
