Disco 2 What have you done recently?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

TAH

Active Member
Posts
183
Location
Hants
Had a Disco day today - no idea how I got away with spending the entire day out there, especially with the in laws over. :
serviced (oils and filters)
fuel filter
cleaned engine bay
removed all the rear side trim and cleaned it properly (easier out of the car)
refitted the rear seats (3rd row)
fixed the PDC
new wipers
greased props
changed front brake discs
interior clean
new gaitors - handbrake, L/H and gearstick
Lithium grease on hinges..

So a good day. Reason I am posting this is just in case anyone wants to know how to any of the above..
 
Me to
But mine was over two days, But looks great.
IMAG0089.jpg
New light bar and raised air intake....
 
Brian S said:
How did you fix the PDC?
Click to expand...
It never worked.and I just ignored it, but while I had the rear left trims out, behind the bottom section in the space was the PDC controller - with a couple of wires off and a multiplug thing loose.. boom. Done.
 
Cheers. Mine is a bit more complex. I think the XYZ switch on the gearbox is not giving out the signal for reverse lights and the PDC needs this signal to work.
Thought you might have done something else I might try but the plugs and wires are all ok.
Cheers.
 
Attempted to remove the head bolts today of my V8 Disco 2 but my socket kept slipping on the first bolt resulting in bleeding knuckles. I'm not too sure whether the slippage is due to using a 16mm 12-point socket or should I use a 6-point 5/8" instead?
 
TAH said:
ooo how hard is it to add the light bar.. ?
want one.
Click to expand...
Hi mate
Sorry for the long time repliy. Got it off e-bay with the 6 spot lamps, Hardiest job is the wiring. All i did was to put two wires, one from the battery and the second from the hi beam upto the sunroof console. Then (this was scary) drilled a hole for the wires from the spot lights to the switches/relays. But later on i will be looking at getting a water prove connecter, So if i want/need to take the roof bar off. I will upload pics when all done.
Thanks
 
Took my sparewheel off because it looked like the carrier needed a bit of TLC...only to find that 2 of the 3 mounting studs were fatigued to the point of only having an inch or so of solid connection to the carrier itself [Gulp!].
Cue phonecall to Rimmer Bros.

The consequences...Ch**t, that is *not* the sort of You've Been Framed clip I'd ever want to see myself in and if you've any nagging concerns at all about your own carriers...please just give them a check.
 
Recent work done on my d2. Replaced 2 wheel hubs. Changed front shocks to gas shocks replaced pads front and back to ebc pads regassed aircon. replaced fuel pressure regulator again. replaced oil sump gasket. replaced aircon fan behind grill. Removed and revealed sunroof. Replaced drive belt tensioner. Replaced brake light switch and replaced fuel pump.
 
You must log in or register to reply here.

Similar threads

Goc3k
Discovery 1 SOLD 1997 300TDI manual D1, Winchester
Replies
16
Views
3K
Goc3k
Goc3k
L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
4K
mondifa
M
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
704
stuu
stuu
Mph007365
1999 P38A 2.5D WHAT IVE DONE, WOULD I DO IT AGAIN?
Replies
4
Views
954
Salisbury Nick
Salisbury Nick
Flossie
P38A What would you change on re commission?
2 3
Replies
44
Views
3K
tomcat59alan
T
Back
Top