200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Does it remove the original filter housing ?
Trailer - challenge truck build
- Thread starter 200tdi ayre
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Does it remove the original filter housing ?
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
One of these so saves a little bit of height but may still have to lift engine slightly to avoid contact.
Does that screw on instead of the filter ?
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Problem with lifting the engine is the intake almost touches the bonnet as is (had to bend it up this weekend to clear) and really dont want taller bump stops 
Problem with lifting the engine is the intake almost touches the bonnet as is (had to bend it up this weekend to clear) and really dont want taller bump stops
So modify it. Got the filter housing too if you want them.
Yes.
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Think I need something like this
Replaces the filter housing so wobt touch on the diff. No engine lift no bump stop extention win win
Now where can I get one
Replaces the filter housing so wobt touch on the diff. No engine lift no bump stop extention win win
Now where can I get one
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
You could always move the engine and box back a tad.
Exhaust is a few mm from the bulkhead already
You can have the one I've got. pm me.
And the outlet on your rad should be a 90. lot less stress and less likely to get stood on.
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
What bulkhead?
Front bulkhead the manifold is almost touching (going to tubulars soon though
Front bulkhead the manifold is almost touching (going to tubulars soon though
I knew what you meant.
widen it.
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
Yeah but then I've gotta modify the props again
Crack on then.
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Other option is belt driven oil pump like dry sumps have.
could make tons of space and have better psi
could make tons of space and have better psi
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Is it an SD1 front cover?
Ashcroft did a remote oil filter
Ashcroft did a remote oil filter
Similar threads
