td5 heater problems

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Splasher said:
Hello again Mate,
Put a Reconditioned head on my TD5 coz the other one was stuffed after head gasket failed big time.
Can you tell me if i need to use a computer to reset all the injectors again please.?? Using the same injectors.:confused:
Click to expand...

If the injectors have been re-fitted in the same port position that they were removed from they don't need re-coding.

Did the old head show a crack when tested?
 
ratty said:
If the injectors have been re-fitted in the same port position that they were removed from they don't need re-coding.

Did the old head show a crack when tested?
Click to expand...

Yes it did...In two places...Showed up after heated pressure test. The head had been off before so i reckon it was going when we bought it in August last year...
Still hey ho... It will all be finished and up and running like new by this evening mate.
And,On Ebay tomorrow.:)
 
Last edited:
Splasher said:
Yes it did...In two places...Showed up after heated pressure test. The head had been off before so i reckon it was going when we bought it in August last year...
Still hey ho... It will all be finished and up and running like new by this evening mate.
And,On Ebay tomorrow.:)
Click to expand...

I,m fitting a reconditioned head with all new Valve stem oil seals, so basically a top end rebuild.
 
Splasher said:
Yes it did...In two places...Showed up after heated pressure test. The head had been off before so i reckon it was going when we bought it in August last year...
Still hey ho... It will all be finished and up and running like new by this evening mate.
And,On Ebay tomorrow.:)
Click to expand...

If you don't know what position each of your injectors originally came from and don't have access to a diagnostic computer to check or alter the codes, let me know and I can always post my nanocom to you so you can check or change the codes as required. :)

The bugger is that after all the grief you've had with it, you won't actually have much time to drive it while it's running properly to get the full enjoyment out of it.:eek:
 
ratty said:
Nice for the new prospective owner.... Not so nice for you.:(
Click to expand...

I,ve put injectors back in there original ports so nanocoms not needed but hey, thanks for that...
And Good luck to the new owner...I know they are getting a quality 4x4 but i,ve lost interest in it and the wife wants something else...Maybe a 200 or 300 TDI...Women eh mate.:eek:
 
Splasher said:
I,ve put injectors back in there original ports so nanocoms not needed but hey, thanks for that...
And Good luck to the new owner...I know they are getting a quality 4x4 but i,ve lost interest in it and the wife wants something else...Maybe a 200 or 300 TDI...Women eh mate.:eek:
Click to expand...

As long as it's a defender and it works my missus is happy
 
ratty said:
As long as it's a defender and it works my missus is happy
Click to expand...
Wish mine was...
Got it all back together again and its running :clap2::clap2::clap2::clap2::clap2:

Just one small diesel leak from the fuel regulator but thats coz i did'nt fit new gasket... Only gasket in the head set that was'nt supplied...That'll teach me eh...New one going on tomorrow..
Keep your ears open if any of your mates want a td5 please...Its on the classifieds now...
And thanks again for all your advice/help...Very much appreciated.
Regards Nigel.;););)
 
Splasher said:
Wish mine was...
Got it all back together again and its running :clap2::clap2::clap2::clap2::clap2:

Just one small diesel leak from the fuel regulator but thats coz i did'nt fit new gasket... Only gasket in the head set that was'nt supplied...That'll teach me eh...New one going on tomorrow..
Keep your ears open if any of your mates want a td5 please...Its on the classifieds now...
And thanks again for all your advice/help...Very much appreciated.
Regards Nigel.;););)
Click to expand...

Congrats in getting it sorted.
penguin.gif


If I hear of anyone after one I'll point em your way.:)
 
Glad you got there in the end! Must have given you some sense of achievement and satisfaction! Pity it has to go now after all your efforts... Good luck with the sale and the next motor :D:D
 
ratty said:
Congrats in getting it sorted.
penguin.gif


If I hear of anyone after one I'll point em your way.:)
Click to expand...

Got the TD5 back home today after running it for 15 miles and everything is sweet except for lots of smoke which i assume is oil in the exhaust from all the towing we did last week. It is starting to clear though and there's loads of power and smoothness.:cool:
Did the gasket on the pressure regulator and did not have to purge it to start...Started first pull of the key... So far so good..:bounce:
 
Splasher said:
Got the TD5 back home today after running it for 15 miles and everything is sweet except for lots of smoke which i assume is oil in the exhaust from all the towing we did last week. It is starting to clear though and there's loads of power and smoothness.:cool:
Did the gasket on the pressure regulator and did not have to purge it to start...Started first pull of the key... So far so good..:bounce:
Click to expand...

Bonus!!!!:):):)
 
You must log in or register to reply here.

Similar threads

B
Coolant dumping - freelander 2
Replies
1
Views
900
Nodge68
Nodge68
steve24v
Roose hoses
Replies
10
Views
955
steve24v
steve24v
S
TD5 Coolant Leak
Replies
4
Views
390
SeansLandy
S
A
Revs & Heater Temp
Replies
2
Views
458
Nodge68
Nodge68
B
TD5 Temp gauge drops to 1/4
Replies
2
Views
213
Bugz
B
Back
Top