TD5 90 Project

Hicap phill said:

I must pay more attention to other photos.

Click to expand...

nah you same as me hypnotised by the LOF GREEN CROWN!

Gwyn Lewis HD stainless Sumo and Drop arm conversion

Fitting this Relay

Or is it this one?


Programable intermittent wiper relay, noice!

New clutch master cylinder, and slave cylinder, connected with pioneer HD braided lines.

123552 miles 5w30 Castrol / Oil filter / roto filter / oil Service
(With help from Dexter)
Also fitted nipple dust covers to SUMO Bars (with Lemforder ball joints x4 )
and to new clutch slave bleed nipple.

Like them side window demisters

Hicap phill said:

Like them side window demisters

Click to expand...

yep they good, work very well indeed, no more chamois pad for the side windows!
I have heated front screen, so considering blocking them so they just throw to sides which should make them faster, cant remember where i got them had them for ages

Diffs fluid change FFS the price of EP90 takes the ****, and i get it trade 25L at a time.

Get one of these, had it 4 years now makes life so much easier, i also bought 3 spare tanks,
1) EP90
2) MTF94
3) ATF RED (for other vehicles)

TERAFOOKINGBAGOSHEETFIRMA

WTfooksticks do terrfirma do when they manufacture thier crap?
use mild tin then give it a salt bath before they paint it in watercolours?
My RTC steering damper was fitted 2-5 years ago, was only a temp install so swapped it out last week for an OME,
Even so thier stuff is SHEITE.
Hubs, Shocks, even thier poly bushes are utter crapola, AVOID them like the plague, ask me how I know
Here is a short clip of me at the terrafookwits head office speaking to their designers and quality control team.

I know your pain… I fitted an TF battery isolator. Driving along I wondered why my indicators were flashing fast. Mrs checked isolator key & was still on,told her to turn off & on and all indicators worked again. (This has happened twice ) Looks like the switch bar is fooked.(blue furry corrosion has started) Don’t worry I got a new one different make to fit soon.this make has been used before in my racers & perform even when submerged

Hicap phill said:

I know your pain… I fitted an TF battery isolator. Driving along I wondered why my indicators were flashing fast. Mrs checked isolator key & was still on,told her to turn off & on and all indicators worked again. (This has happened twice ) Looks like the switch bar is fooked.(blue furry corrosion has started) Don’t worry I got a new one different make to fit soon.this make has been used before in my racers & perform even when submerged

Click to expand...

Agree Allmakes / TF are total Garbage, Bearmach not much better, I stick to LR stuff of reputable aftermarket, Old Man emu etc

Don’t worry I got a new one different make to fit soon.this make has been used before in my racers & perform even when submerged[/QUOTE]
Recommend Blue sea stuff, better than victron etc

KISSMYAURA said:

Don’t worry I got a new one different make to fit soon.this make has been used before in my racers & perform even when submerged

Click to expand...

Recommend Blue sea stuff, better than victron etc[/QUOTE]
Unsure of the make but it has extra spade connections for ECU etc so they disconnect & don’t get a back feed while shutting down

Hope your well and good to see the project is still alive. Do you still keep a sheet of all the bits you’ve done?!

resto_d1 said:

Hope your well and good to see the project is still alive. Do you still keep a sheet of all the bits you’ve done?!

Click to expand...

kind of, i do for major works not so much for mods etc see attached

Pano Glass

New Cross member and rear NAS Step,
(still got to finish paint on the tow ball etc)

Next up

Roof re-spray will be done in Raptor black but I am curious / tempted to do in epsom green tint.....