Sy's Discovery 300tdi

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

300td1

New Member
Posts
11
Just purchased my first disco. took quite a while for me to find a descent one that wasnt rotten. But it does need a bit of tinkerin with. Ive got a list to work through lol, noticed on the drive home somthing was humming when you accelerated with it which i think is the fan belt, When you accelerate or decelerate there is a knock from the back which i think is the a frame bush? and i have just noticed all the core plugs are leaking :( - First thing will be to get the cam belt done. Any way here it is
T2eC16Jy0E9s2S54KBQcY0NC8Pg60_58.jpg

KGrHqNpEFYkbUECfBQcY1DjCQ60_58.jpg

KGrHqZhQFBp-42toIBQcY0-Es1Q60_58.jpg

T2eC16J8E9s4l6Bd5BQcY0gMmHw60_58.jpg

Just been to paddocks at matlock and got:

water pump
full cambelt lit
thermostat
fanbelt tensioner
fanbelt
a frame ball joint
powerflex bushes for the a frame


DSC_0074.jpg
 
Last edited:
Just purchased my first disco. took quite a while for me to find a descent one that wasnt rotten. But it does need a bit of tinkerin with. Ive got a list to work through lol, noticed on the drive home somthing was humming when you accelerated with it which i think is the fan belt, When you accelerate or decelerate there is a knock from the back which i think is the a frame bush? and i have just noticed all the core plugs are leaking :( - First thing will be to get the cam belt done. Any way here it is
T2eC16Jy0E9s2S54KBQcY0NC8Pg60_58.jpg

KGrHqNpEFYkbUECfBQcY1DjCQ60_58.jpg

KGrHqZhQFBp-42toIBQcY0-Es1Q60_58.jpg

T2eC16J8E9s4l6Bd5BQcY0gMmHw60_58.jpg

Just been to paddocks at matlock and got:

water pump
full cambelt lit
thermostat
fanbelt tensioner
fanbelt
a frame ball joint
powerflex bushes for the a frame


DSC_0074.jpg

Brit parts, silly billy
 
F*** why arn't they any good? ill take them back if they are **** as last thing i want is the cambelt snapping
 
Hi yeh its a daycoe belt im just abit worried about the other stuff now. but havin said that they are all covered for 2 years
 
It will be fine. Fitted SKF belt kit and it failed instantly, so got a Britpart and quality was better than OE quality SKF!!

Don't worry about the Britpart, it's not nearly as bad as people like to make out.

I've done a LOT of work to my disco, it's predominantly Britpart!
 
Just make sure whatever you order is OE quality! This applies to service items usually, there are 2 or even 3 qualities available, and good golly gosh the cheapo stuff is terrible!
 
Britparts ok for filters n stuff - not a lot can go wrong with that! More of a mistake using paddocks imo!


i ordered a cv and wheel bearings from paddocks a couple of years ago.... ordered online on december 23rd, country covered in ice and snow but i fully expected delivery arround jan 3.
parcel van turned up with all the right bits on dec 28.... frankly i was a tad surprised.
 
I'd take back
water pump
full cambelt lit
thermostat
fanbelt tensioner
fanbelt
a frame ball joint
Other than that you'll be allright. It don't leave a lot left. lol
 
Back
Top