suspension lowering

Anyone of the buddies with an idea or knowledge as to how to lower or increase the Freelander 1.8 ,3- door 1999 height? Are there any bars or anything on the car that one can adjust to your choice,on the back and front suspension ?

let the air out of ya tyres or fit bigger rims, depending on which one yu want.

park it in liverpool , then depending on the size of the nearest bricks it will either be higher or lower when you return

Don't bother fella...

I had my last motor lowered 40mm all round. It was done professionally and tracked up etc.

It handled excellently, but ate rear tyres at the inner edges and caught every speed bump going!!

I also think that my gearbox bearing collapse had something to do with the driveshafts being much closer to the gearbox (kinda pushed in).

Oh and when it had to be recovered after gearbox breakdown, the yellow recovery people were arsey as it was too low for recovery and got damaged (front bumper and rear exhaust) on their towing dolly.

Regards,

Steve