suspension in extended mode and Suspension failure

The wiring is the same - did you order a 10MY or a 09MY height sensor?

OK. It's getting wilder and wilder

I ordered a replica for 2002-2012.OEM Numbers: LR020627 RQH000121 RQH500420 RQH500421

My VIN AA30....

what would be the correct one

Sensor Front Less Adaptive Damping to VIN AA325623 LR010827 Supersedes to LR023651

Thanks alot! I'll go to Land Rover tomorrow and order the right spare part with my VIN. I'll get back

Stev said:

OK. It's getting wilder and wilder

I ordered a replica for 2002-2012.OEM Numbers: LR020627 RQH000121 RQH500420 RQH500421

Click to expand...

That part number is for 2002-2009 MY, which as you're finding out, is different to production year. To be fair, the seller shouldn't be saying it's valid for any L322 production year. Other sellers list it from the year the part was introduced, even if it's backwards compatible... https://www.lrparts.net/lr020627-ri...ue-front-right-hand-from-2004-up-to-2009.html

So to rule out errors. I don't have an adaptive damper, right? Otherwise cables would have to come away from the damper.

No you don't - you can also tell you don't as there are only 3 wires connected to the height sensor, on the L322 the sensor has two separate circuits in it, one for the suspension & one for the ARC system so you would have 6 wires connected if you had ARC, later versions have only 3 wires, not 6 and the height values are broadcast on HS-CAN.

It's done!!!!

Bought LR023651 and installed it and then the calibration went through without any problems. I can now raise and lower the car without any problems and it no longer goes into extended mode.

I would like to thank everyone involved who helped me find the solution. Thanks alot !!!!!!