Starting a 350 Chevy conversion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Sam RRC

Member
Posts
11
Location
Glos
Afternoon all,

Land Rover first-timer here, starting a conversion to Chevy power and sorting out a few small corrosion areas in the process. I'll be advertising my low mileage (77k) RV8 engine and LPG kit soon if you're after that sort of thing and no doubt I'll be asking annoying questions when I find the other Chevy owners on here!

...I'd say I'll happily answer questions too, but as a first timer I'm pretty green right!

Cheers
Sam
 
Welcome - cool project ! We need pictures :D
Cheers - not a lot to show just yet, under the bonnet is untouched.

I've bought a Chevy to ZF adaptor kit and headers (from an Overfinch) and am looking at inner wing kits (or whole front end) from Froggatts.

Will make a start in a few weeks once DIY obligations on the house are done.
 

Attachments

  • FullSizeRender.jpg
    FullSizeRender.jpg
    258.5 KB · Views: 129
Afternoon all,

Land Rover first-timer here, starting a conversion to Chevy power and sorting out a few small corrosion areas in the process. I'll be advertising my low mileage (77k) RV8 engine and LPG kit soon if you're after that sort of thing and no doubt I'll be asking annoying questions when I find the other Chevy owners on here!

...I'd say I'll happily answer questions too, but as a first timer I'm pretty green right!

Cheers
Sam
what HP 350 are you using? fuel injected or carburetor
 
what HP 350 are you using? fuel injected or carburetor
Sorry for the slow reply, I'm not on the site much ... I'm looking at getting a mildy tuned carb engine built by a guy near Tenby, however keeping my eye on ebay in the meantime for any proven motors I could drop straight in.

I should probably look harder for classifieds ... suggestions welcomed!

Thanks
Sam
 
Back
Top