show your camping trailer

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Im planning to make a trailer using a leaf sprung series axle, it will be the size of a double mattresses and have a bit of storage under the bed. Going to be made from 1"box section mainly and be waterproof. Like a small caravan type thing.
 
Here's mine when it was a trailer tent taken about 5-6 years ago
 

Attachments

  • 706.JPG
    706.JPG
    140.7 KB · Views: 273
  • 707.JPG
    707.JPG
    39.5 KB · Views: 209
  • 710.JPG
    710.JPG
    142.2 KB · Views: 178
  • 705.JPG
    705.JPG
    160.1 KB · Views: 236
And here it is now after i stripped all the camping stuff out of it and made it into a general purpose trailer, can't carry much in weight but i have towed a s11a gearbox in it from manchester to devon whilst i was on my way to my caravan in cornwall, there is a lip all round the chassis of the trailer which is very handy for when ratchet strapping stuff down, the only down side to it is it has inboard wheel arches so although the inside dimentions are 6'6" long x 4' wide the arches do get in the way sometimes but other than that its a great trailer, its also braked and is on coils springs aswell :)
 

Attachments

  • 005.JPG
    005.JPG
    265.7 KB · Views: 224
  • 009.JPG
    009.JPG
    366.3 KB · Views: 210
  • 017.JPG
    017.JPG
    191.5 KB · Views: 225
  • 016.JPG
    016.JPG
    231.1 KB · Views: 205
Im planning to make a trailer using a leaf sprung series axle, it will be the size of a double mattresses and have a bit of storage under the bed. Going to be made from 1"box section mainly and be waterproof. Like a small caravan type thing.

If you put a Series anything on it, even underneath......it'll leak

Fact :p
 
Heres a few updated pics of my setup, I finally got it out and am getting it prep'd for summer.

First of closed up (without the cover on top), you can see the outriggers I have made just to aid in stability, they made a big difference, was going to do 4 but 2 is more than enough:
554084_10151371744242374_206723979_n.jpg


and fully unfolded, needs a bit of pulling around to get the canvas in shape but its pretty much spot on:
6672_10151371744652374_1295792037_n.jpg


and a pic inside, cooker, grill, sink, soon to have 12V lighting and a stereo added, its got 240V hookup as well, luxury camping in a small package:
548996_10151371803482374_1674780687_n.jpg


Once its tied down properly it straightens itself out a bit, just need some weather to try it out properly...
 
Last edited:
Just found some more pics from when i broke up my mates disco and scrapped the chassis
 

Attachments

  • 102.JPG
    102.JPG
    249 KB · Views: 210
  • 103.JPG
    103.JPG
    212.5 KB · Views: 267
  • 104.JPG
    104.JPG
    189.8 KB · Views: 215
Back
Top