series 3, oil coming from the handbrake drum

BENSPEED888 · Feb 10, 2012

not had chance to strip it yet, but i'm guessing it's a knackered output seal on the transfer box? is it likely to be much hastle to change? are the seals available?

cheers
Ben

oxides · Feb 10, 2012

Likely - dunno, never done one, yes.

BENSPEED888 · Feb 10, 2012

thanks for replying, where do you think would be a good place to try for a seal?

storm99 · Feb 10, 2012

BENSPEED888 said:
thanks for replying, where do you think would be a good place to try for a seal?

Dudley zoo.

Bump · Feb 10, 2012

Look up the part in the manual then try lrdirect.com

(or lrseries.co.uk or paddocks or craddocks)

pef77 · Feb 10, 2012

there are two seals one that seals the output flange and a felt one similar to that found on the hubs but not the same that goes behind the nut that holds the flange in place, could be the nut come loose and felt seal knackered..

BENSPEED888 · Feb 10, 2012

ok, thanks guys

will investigate further asap

oxides · Feb 10, 2012

Diagrams and part no.s here

pdf Land Rover Manuals | Landroverweb.com

I'm not sure they have seals at Dudley zoo!

lodger · Feb 11, 2012

Not a hard job, will take you about an hour, or two hours if you're slow like me. Don't forget to top up your oil afterwards. EP90 GL4. A good chance to check the working of the hand brake too!

series 3, oil coming from the handbrake drum

BENSPEED888

New Member

oxides

Well-Known Member

BENSPEED888

New Member

storm99

Spreading Joy & Harmony

Bump

Well-Known Member

pef77

Active Member

BENSPEED888

New Member

oxides

Well-Known Member

lodger

New Member

Similar threads