Transfer Box oil seals - are they the same on both sides of the case? - Puma 90 2.4

I'm having to drop the gearbox tomorrow on my Puma 90 2.4 (with help you bet... bit out of my league tbh....

Have had a long-running transfer slow oil seal leak on the gearbox side and thought would take the opp to change it.
Quick qu: Are the seals on both sides of the transfer casing the same?
I have an FTC4939 (pic attached - yes, yes - I have a corteco not an original)... I was looking through the exploded diagram of the transfer box but not completely sure - the original LR part no is LR086041
Any help much appreciated
Thank you

Use the website above to search for part numbers. And prices for parts. Looking at the front and rear output shaft diagrams indicates the seals have same part numbers for both ends.

thank for a better exploded diagram too..

Wimblowdriver said:

Rear Output Flange - Find Land Rover parts at LR Workshop

View the Land Rover parts diagram for Rear Output Flange

www.lrworkshop.com

Use the website above to search for part numbers. And prices for parts. Looking at the front and rear output shaft diagrams indicates the seals have same part numbers for both ends.

Click to expand...

thank you so much... thought so but always good to double-check.