running without front prop shaft

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

shane11

New Member
Posts
2
I had a clonking noise when pulling away in first and second gear.
I believe this to be the UJs in the front prop shaft. i have now removed my front prop shaft and went to drive the landrover using just the rear prop shaft, but it wont move.
Does this mean my transfer box is knakered?
 
is your light on the the dash for the 4x4 ?
is it selected right (have a jiggle about with it )
does the prop on the rear move (rotate) by hand ?
rear diff ok ?
 
Make sure difflock is locked. Drive smoothly as now you have only the rear wheels taking all the power Assuming the rear is in perfect working order you can drive for ever but drive smoothly as you are not sharing the power through both axles
 
shane11 said:
I had a clonking noise when pulling away in first and second gear.
I believe this to be the UJs in the front prop shaft. i have now removed my front prop shaft and went to drive the landrover using just the rear prop shaft, but it wont move.
Does this mean my transfer box is knakered?
Click to expand...

Do you live anywhere near Doncaster?

If so, ignore the others, YES it's nackered. I'll buy it off you, £34 OK ?
 
thanks for your help guys, propt shaft is back on now, at least i know its not the transfer box :S
 
You must log in or register to reply here.

Similar threads

Lej
Land rover discovery 2 front prop shaft - can't find correct size
Replies
5
Views
2K
tilly2
tilly2
Zorro587
Freelander 2 (LR2) New prop shaft noise - alignment?
Replies
3
Views
945
Zorro587
Zorro587
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
1K
ChristopherDailey
C
Maat
P38A Front prop vibration at 45kmph
Replies
8
Views
547
MrGorsky
MrGorsky
Zorro587
Noise gone but prop shaft queries abound
Replies
14
Views
2K
Chris_68
C
Back
Top