RRC rear door

Hello all. I wonder if you might be able to help me?

My off side rear door top is sitting proud of the seal and is wobbly. I suspect the dreaded rust and therefore I think I need a new door. Do you know where I can get a new one or, more likely, a good second hand one? I've checked Ebay. Are there any good breakers that specialise in RRCs that you know of?

Thanks a lot.

James

Martin toole in southampton, he is on ebay as range rover recycling or summit. one of these guys will give you his number

Martin Toole,
Range rover recycled parts
eBay ID: V8RRCPS65
Tel: 07885 399 785
Southampton based

Thank you very much! I'll give him a bell.

Where ya based Jame r?I know of one near me, but that wont help if you are in somewhere else

Down in deepest Hampshire!

James R said:

Down in deepest Hampshire!

Click to expand...

Where are you mate?, I am in alverstoke ,Gosport.

New Milton

Let me know if you need a hand ever matey

fett said:

I am in alverstoke ,Gosport.

Click to expand...

Cor, you must be posh then

Greetings from Elson

PML , yeah just a bit lol although the dents in my rangie disagree!

Didnt know anyone was that close, what the spec on ur bobtail? do you drive anything else?

James R said:

Hello all. I wonder if you might be able to help me?

My off side rear door top is sitting proud of the seal and is wobbly. I suspect the dreaded rust and therefore I think I need a new door. Do you know where I can get a new one or, more likely, a good second hand one? I've checked Ebay. Are there any good breakers that specialise in RRCs that you know of?

Thanks a lot.

James

Click to expand...

If you are refering to the channel the glass runs in, it is bolted into the door and is replaceable, no need to buy whole door, and maybe one of the bolts coulda fallen out or come loose, you should be able to slip the rubber on the top of the door up enough to get a torch shon in there to have a look.

fett said:

PML , yeah just a bit lol although the dents in my rangie disagree!

Didnt know anyone was that close, what the spec on ur bobtail? do you drive anything else?

Click to expand...

PM sent.

Cheers

Chris

just round the corner, lymington here. Have you tried Paul Light land rovers in Hordle?

Dry Hump said:

just round the corner, lymington here. Have you tried Paul Light land rovers in Hordle?

Click to expand...

What you driving?

Hi Fett, a p38. A glutton for punishment, it is my third. I have also had 3 classics throught the years, and one depart from Rangies, dare not meantion what it was here!!!!

Why did you move away from classics?, let me know if you ever need a hand matey.

I dont know fook all but if you nod yer head I'll hit it lol :doh:

Dry Hump said:

just round the corner, lymington here. Have you tried Paul Light land rovers in Hordle?

Click to expand...

Hi! No, I didn't know he even existed. Is he any good? Does he do most things for bodywork and mechanical? Might need my sills doing soon too.

fett said:

Let me know if you need a hand ever matey

Click to expand...

Thanks a lot! You too.

Hi James,

Paul Light Land Rovers
Kings Farm
Everton Road
Lymington
Hampshire SO41 0FF
Telephone:01425 620626

He is very good, been going for years. Does most things machanical, welding etc. Not to sure re bodywork. Sells parts over the counter, usually from stock and he is local. He can be a a bit pricey, but you can haggle and he wont rip you off!!!! Mine is going up there on friday....joy!!!

Fett, i left the classic because i was offered an Overfinch Autobiography p38 some years ago, at a very resonable price, couldn't say no! and what a great car that was, so wish i had never sold it.