hi all first post so hi to all here...i am doing a retrofit sat nav to my range rover 53 plate hse td6..i have sav nav unit number yik 500030..and purchased a proper wiring loom from bimmernav for the x5/range rover.problem i have is there is no plug on the sat nav unit for the ariel plug? and i have plugged in the two leads on the back of the unit but still have a lead over from the radio cd unit that was plugged into the side do i need to strip it down and put these wires into the other two plugs..hope i explained ok and thanks for your time.....
retro sat nav loom??
- Thread starter td6dave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Wow!! Another tw@t that spits his dummy because he didn't get a reply to his 1st post!!
Dont bother introducing yourself or saying hello..we are after all only here to serve you when you demand it!!
Yes, most of us can count to three and beyond...we can also spell 'complicated'!!
Dont bother introducing yourself or saying hello..we are after all only here to serve you when you demand it!!
Yes, most of us can count to three and beyond...we can also spell 'complicated'!!
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
7??
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Stroppy Range Rover owner......never
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
By the way...whats a 'sav nav'?
Is it a sausage eaten by a construction worker?
Is it a sausage eaten by a construction worker?
- Posts
- 83,296
- Location
- Embasinga stocæ
Ask Bimmernav!
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Next time..(although i doubt you will be back you impatient, self-righteous penis)try a different approach...the use of correct grammar, spelling and sentence construction helps! 1,2,3,erm4!
http://www.landyzone.co.uk/lz/f7/need-advice-fuel-gauge-heating-system-109723.html
http://www.landyzone.co.uk/lz/f7/need-advice-fuel-gauge-heating-system-109723.html
Last edited:
isnt the antenna lead a seperate one that just connects to the antenna. It would surely have no need to transfer any data along the loom. The antennas are mounted in the rear side windows arent they? If so, I'm pretty sure the antenna cable just connects directly to the unit, with a coax plug, with little securing clips on the sides.
