Request for dimensions

Does anyone, off the top of their head, know the dims of the connecting pipe between the bracket holding the flexi-pipe and the clutch slave cylinder?

A stealer has managed to bend, flatten and split it and wants extra dosh to replace it as the clutch 'was working when I picked it up' !!!

The LR part number is NRC9595, but at £20+ plus fitting, I can make one up myself for nothing ... all I need are the measurements of:
a) the distance between the fittings, and
b) the diameter or radius of the two bends.

I would be eternally grateful if anyone were to be able to provide the details, as I really need her running again as soon as ...

Hi OSD, very hard to measure and get the angles in the right plain to each other but hope this helps.

Many thanks for that Mick.
That diagram looks lke it's for a 300tdi whereas mine's a standard 4-cylinder where the pipe comes from the flexi bracket on the slave mounting, to the slave port.
Everything sorted ... apart from the 3/16" pipe, wot I would have sworn I had, so I'll have to keep on looking!
It will get done today, one way or another!!

OK mate, yes, its a 300tdi. Good luck with the repair anyway.

Having to fork out for a new one as the local stealer has gone bust, and I can't get 3/16 pipe until Tuesday but I can get the complete pipe on Monday!
Some B'Stard upstairs don't like me at the moment!!
Cheers anyway Mick .

it's about 8 inches diameter and nearly 9 foot long

Hippo said:

it's about 8 inches diameter and nearly 9 foot long

Click to expand...

And it's not Ukrainian - it's a Pole!