Replacement key reprograming....?????

tommivercetti · Dec 10, 2009

Guys,

I know this one has been talked about on the forum for quite sometime, however....:blabla: I have just bought a second hand key for my Range p38 4 lt petrol & have tried to reprogram the key fob. I have tried what I believe to be the correct procedure for the year of my vehicle of which is a 1995....So I have turned the key from left to right whislt pressing and holding the "lock" button on the fob. I have no joy and it will not program the fob to lock and unlock from the fob???!!!!!!

However this new key that doesn't work off the fob will start the engine and manually, by putting the key in the lock and turning it, lock and unlock the vehicle, arming and disarming the alarm????????!!!!!!

Really unsure on this one guys could someone put me straight on this as maybe Im not doing something I should??!!!:doh:

Thanks,

T.

j the range · Dec 10, 2009

it will never work only way to get key fob that works is buy a new one

nathan5346 · Dec 10, 2009

how does the secondhand key fit the doors n ignition?

j the range · Dec 10, 2009

he prob had new dufer cut and put into fob??? maybe

Dopey · Dec 10, 2009

I know this one has been talked about on the forum for quite sometime

If you know that and you have looked at other posts on the subject, you must have known before you bought it that it wouldn't work, so why are you surprised that its not working now you bought it??

how does the secondhand key fit the doors n ignition?

Good point he must have changed the key over and put it in the new fob

tommivercetti · Dec 12, 2009

Guys, thanks for the replies. I bought a second hand fob with an uncut key. I was led to believe that on reprograming it would automatically program to my ecu?
unless I have been misinformed?

Thanks,

T.

Datatek · Dec 12, 2009

tommivercetti said:
Guys, thanks for the replies. I bought a second hand fob with an uncut key. I was led to believe that on reprograming it would automatically program to my ecu?
unless I have been misinformed?

Thanks,

T.

Yes:doh:

Irishrover · Dec 12, 2009

You have been misinformed.
This topic has been more than well covered on the forum...should have done a search.
You deserve everything you have got and perhaps will realise like the other "Mugs" that have bought them that they don't work and no-one can reprogramme them other than Huf..the manufacturers..and they will not, and do not reprogramme used keys.

So for the last time....THEY DON'T
T WORK>>>THEY DON'T WORK.

Suppose we will get the usual post now "I know someone who had one programmed..but can't remember where they had it done !!!!!!!!"

tommivercetti · Dec 12, 2009

Irishrover said:
You have been misinformed.
This topic has been more than well covered on the forum...should have done a search.
You deserve everything you have got and perhaps will realise like the other "Mugs" that have bought them that they don't work and no-one can reprogramme them other than Huf..the manufacturers..and they will not, and do not reprogramme used keys.

So for the last time....THEY DON'T
T WORK>>>THEY DON'T WORK.

Suppose we will get the usual post now "I know someone who had one programmed..but can't remember where they had it done !!!!!!!!"

I think your comments to someone whom is very new to the forum are not very welcoming at all IrishRover????
I had a brief look through the other threads left on the forum and would not have asked the question had I had the answer to Re programing second hand keys etc.....

Irishrover · Dec 12, 2009

You are spot on...I am one of the most unhelpful Old Gits on here.:behindsofa::violin::hysterically_laughi

Irishrover · Dec 12, 2009

I'm going home to tell me Ma you've made me cry.

oil dripper · Dec 12, 2009

yer big wuss

Datatek · Dec 12, 2009

Irishrover said:
You are spot on...I am one of the most unhelpful Old Gits on here.:behindsofa::violin::hysterically_laughi

Ar e dont suffer fools gladly

But E do know a lot

Irishrover · Dec 12, 2009

You can come round and play in our yard anytime.

j the range · Dec 12, 2009

i been waiting for you to see this one irish tis soooooo funny. i did think of telling him to pm you for help ha ha ha ha

Irishrover · Dec 12, 2009

Owya doin Scouse???? Just happen to have a bad hair day today....Too much Porter last night and er'indoors want's to go shopping....again.

Christmas..Bahh Humbug.

Bastids cancelled the Xmas bonus for us wrinklies anorl..bastids, bastids, bastids.
:mooning::censored::baby::smokin::beer2::mil36:

Heavy Breather · Dec 12, 2009

Irishrover said:
You are spot on...I am one of the most unhelpful Old Gits on here.:behindsofa::violin::hysterically_laughi

I think you've got some serious compitition on here Irishrover:rofl:

j the range · Dec 12, 2009

hi mate me ok sorted rr just need new engine now and it will be on the road lol. i dont think you grumpy mate no worse than the rest of us old feckers

gemsdad · Dec 12, 2009

Irishrover said:
You are spot on...I am one of the most unhelpful Old Gits on here.:behindsofa::violin::hysterically_laughi

yer you know nothing do yer you miserable old bugger.never help anyone and always shouting at people.

:behindsofa::bolt::hysterically_laughi:hysterically_laughi.how are you j.ok i hope.

rangiegal · Dec 12, 2009

Now see what you've all gone and done - upsetting people again!!!! Typical grumpy old gits, especially Irish.....never helps anyone now does he :hysterically_laughi:hysterically_laughi Don't get too upset now John!!!!

Soon-to-be-X5-owner

Laurie:behindsofa:

Replacement key reprograming....?????

New Member

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

New Member

Well-Known Member

Well-Known Member

New Member

NOT BOTHERED.

New Member

Similar threads