I've removed the bench seats from the back of my 90, before they feel out, and am left with some gaping holes, would it be ok to cut the mess out then rivet and Sikaflex some plates over the top or best to go and get someone to weld them up for me. I dont intend to replace the benches in the back.
Repairing rot under bench seats
- Thread starter TomLR
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
rivet and sikaflex should be ok. Itll never be a looker but itll be good enough
- Posts
- 11,020
- Location
- North of the Wall
Ha ha, they're not gaping holes mate. They're just little holes
Rivets and sikaflex will be ok. I cleaned mine down to shiny metal first. Etch primed and painted. Some I stuck with sikaflex some with araldite.
- Posts
- 11,020
- Location
- North of the Wall
Doesn't get safer than Araldite. Probably stronger too. Certainly in my experience.
Similar threads
