_Snowy_
Member
- Posts
- 13
- Location
- Portsmouth
Hello again,
My 99' 110 originally had the three individual 2nd row seats albeit with the high backs. Many moons ago I swapped them out for a 60:40 set as part of my campervan setup. Since then I also had the rear tub/2nd row floor repaired with some lovely thick yrm panels.
Due to arrival of Snowy Jr the 110 is going back to yummy-mummy school run spec and as the 60:40 is a bit of a bodge held down with a ratchet strap the originals are going back in. Stupidly I didn't allow for the original seats when the tub was patched and I now have no idea what the placement/measurements are like for the leg brackets as the original holes are gone.
The basic answer is to center the middle seat as a datum and work outwards from there but I thought I'd ask about first to see if anyone can send a pic of theirs or some measurements if possible?
The photo for reference is the black 60:40 leg on the left and the rusty green individual bracket on the right. I need to work out where that individual bracket goes on each side and then the two double ones in the center.
Many thanks
My 99' 110 originally had the three individual 2nd row seats albeit with the high backs. Many moons ago I swapped them out for a 60:40 set as part of my campervan setup. Since then I also had the rear tub/2nd row floor repaired with some lovely thick yrm panels.
Due to arrival of Snowy Jr the 110 is going back to yummy-mummy school run spec and as the 60:40 is a bit of a bodge held down with a ratchet strap the originals are going back in. Stupidly I didn't allow for the original seats when the tub was patched and I now have no idea what the placement/measurements are like for the leg brackets as the original holes are gone.
The basic answer is to center the middle seat as a datum and work outwards from there but I thought I'd ask about first to see if anyone can send a pic of theirs or some measurements if possible?
The photo for reference is the black 60:40 leg on the left and the rusty green individual bracket on the right. I need to work out where that individual bracket goes on each side and then the two double ones in the center.
Many thanks
