Removing Radio/Cassette

CHAZZER 2459 · Jan 25, 2011

Hi All
In my freelander 1 theres a radio/cassete this has two holes one on each side for removal tried coat hanger wire,3,25 rods ,screwdrivers nothing seems to enter and release the unit any ideas please

Matt_TD4 · Jan 25, 2011

Halfords do radio removal tools. Or, pick some up from the main dealer. They cost peanuts.

Matt_TD4 · Jan 25, 2011

They should look like this:

http://replacementradios.com/images/fordremovaltools.jpg

CHAZZER 2459 · Jan 25, 2011

Hi perhaps my discription was misleading there is only 1 hole each side of unit so these tools for removing unit with 2 holes each side wont work

Matt_TD4 · Jan 25, 2011

Agh, ok.....Then you need this one. Can be got from the same places...

http://www.carheadunit.co.uk/temp/images/audi-a3-radio-removal-tool.jpg

Kuba · Jan 26, 2011

Hi there , I had to take out my radio/cassette (FL1 03 plate) it needs an allen key (cant remember the size) and you loosen a screw in the hole which releases the holing plate, the radio then just pulls out, refit is the opposite taking care not to overtighten.

OldIrishWulf · Jan 26, 2011

I use 4 masonry nails ,not sure the gauge.Just push them all the way in tight,either get your fingers into the casset deck or press on the nails on both sides and pull.

CHAZZER 2459 · Jan 26, 2011

Hi All the answer was the allen keys many thanks
Charlie

Removing Radio/Cassette

CHAZZER 2459

New Member

Matt_TD4

New Member

Matt_TD4

New Member

CHAZZER 2459

New Member

Matt_TD4

New Member

Kuba

New Member

OldIrishWulf

Well-Known Member

CHAZZER 2459

New Member

Similar threads