Rear window needs to relearn?

Michael Graber · Jul 27, 2017

a local mechanic has been working on the rear window will go down but will not go up. He suggested I take it to the dealership and ask if they can perform the "relearn" function on the computer

Anyone familiar with this "relearning"?

Alibro · Jul 27, 2017

Have you tried disconnecting the battery? When reconnected the window should go all the way down, then you hold the button down until it is back up and job done.
Unless of course you have a duff cable, or latch.

Michael Graber · Jul 28, 2017

Thank you.
After posting this thread I did come across some threads that had very complicated instructions on how to recalibrate the window. It sounded like this has been attempted.

Nodge68 · Jul 28, 2017

Michael Graber said:
Thank you.
After posting this thread I did come across some threads that had very complicated instructions on how to recalibrate the window. It sounded like this has been attempted.

If the window isn't going up using the switch, then it has a fault. The window calibration can only be carried out if it goes up using the inside switch. There's no "relearn" that LR can do, other than the recalibrate procedure shown in the owner's manual.

saxavordian · Jul 29, 2017

Could be the switch being faulty. Take that switch out if you cannot hear the motor trying to return the window up. It the same as the cubby box type and the doors if a 5 door model. Next swap a work switch to confirm faulty one is bad.

Rear window needs to relearn?

Michael Graber

Member

Alibro

Well-Known Member

Michael Graber

Member

Nodge68

Well-Known Member

saxavordian

Well-Known Member

Similar threads