ready for a gallon of petrol and some matches

Air suspension inactive. used all comms got articulation fault. 0 x 64 ox0064 from all coms log. reset drive for 2 mins same again. used live data sensor readings were as follows front left 217 rear left -119 right front -131 right rear 1484 all these readings were steady never changing .
driver door controls wont operate windows mirrors etc. only thing that works is the access button. checked fuse f11 all o.k.. please if anyone can help. car will be sold when repaired cant take any more. tnx

probably water ingress on a frame connectors ,or in boot !!! check wiring either side in front going to becm and then do full test and smell check on main fuse box especially relays ...cheers mozz

Hey Mozz, he's talking L322....

First thing I'd say is check all the connections to the sensors, they can suffer water.

Articulation faults means the sensors are reading well out of range, which by the looks of it they are.

Could try a recalibration, but with those readings not sure if it will respond to it.

Check sensors and the wiring thereto!

have tried recalibration all comms will only let me do simple recalibration. also. have replaced bettery was only reading 11.8 volts. replaced now reads 12.6 volts 14.2 volts when running. any ideas on driver door control panel.?

any way to test sensors?