P38A radio wiring... yawn...

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I'm using Windows 10 on mine but I might of copied it from the old laptop rather than installing it.

Other option is to try compatibility menu. Think it was after right-clicking the executable.
 
Have a Windows 10 laptop will try to download it later and see if i have the same problem. I am still running the best version of Windows there has ever been XP. :D
 
Run windows 7 on mine - mostly had to get used to if for work, as everything went that way. New laptop came with 8 on it, and that lasted about half an hour before it got dumped and rolled back to 7... Still have an XP laptop that I use for some diagnostics work though as it plays nicer..

That aside... audio wiring.
Subwoofer... wires at the head unit are Orange & Orange/Black. It's a line out level signal from the factory head unit to an amplifier in the subwoofer. If you have the premium/DSP system then the signal goes into the DSP amp first as it controls the level ultimately sent to the subwoofer amplifier. The subwoofer amplifier will power up with the other amps/DSP amp when 12V is on the Grey/Black wire (connected to the remote on wire on the head unit).

Steering wheel controls... Not a straight plug and play on most head units. You need an adapter unit that reads the voltage drop on the wire when one of the buttons is pressed (it's a resistor ladder type system) and then covnert that to the protocol for your aftermarket head unit. In my RR when I had my JVC head unit installed, I ended up buying a PAC SWI-RC unit from the USA as it was programmable, and the supposedly 'plug and play' unit from Nexxia/Autoleads didn't work, and they wouldn't give me any support on trying to make it work.

If you post a picture up of the back of your head unit, I can tell you what system you have and what each of the wires does. If it's the premium system, then I have a spreadsheet of all the wiring which I wrote when I first bought my RR and was working on the stereo system.
 
in Windows 10 you have two options:
  1. Download the Zip & run Rave from the folder
  2. Grab the three ISO versions, and then double click the version you need. Then simply runs the EXE inside the main folder.
Win10 auto mounts the ISO file as if it is a CD. On Macbook, you need the decrypted version, and then open it with Adobe Reader. Doesn't work with Apple Preview application.

I have all three ISO's, and the decrypted version which can be shared over dropbox if required.
Also have the Rave-One CD extracted as a 5199 page PDF courtesy of a guy on RR.net !!
 
Wow, thankyou, I have found.
myrangeroverp38.co.uk.
I'm in the process of downloading the file I hope.. So, tomorrow, as it is taking an age to do. I will know better.
It astounds me that you have all gone out of your way/a to help me over something maybe trivial in most eyes. I will keep you all in the loop as to whether or not I'll call upon the generosity given my way.
Effing brilliant. Cant thank you all enough..
 
Have you seen the other programs as well? Nice find. Especially if we have multiple buses or work on other peoples. Once again thanks for all your help.
 
You must log in or register to reply here.

Similar threads

J
Radio wiring diagram please or similar
Replies
2
Views
3K
jiginc
J
The Mad Hat Man
Wiring in a split charge relay system
2
Replies
23
Views
80K
Rallymantony
R
J
wiring a radio into a series 3
Replies
11
Views
3K
mickobrien
mickobrien
H
Re: NINE CRUCIAL ARTICLES FOR FIGHTING THE SATANIC JEWISH NEW WORLD ORDER: THESE ARE NINE ARTICLES THAT I HAVE BEEN POSTING OVER THE PAST SEVERAL DAYS
Replies
1
Views
1K
Cyberwraith
C
J
Re: Bush supports forest fees, and privatization of your public lands
Replies
0
Views
1K
John
J
Back
Top