G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
is it just a railko? that should just tap in mine did
Question for Buster (or anyone who can help please!)
- Thread starter Trewey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
yes
that's what I thought too.
fookin Britpart **** again!
and I gotta have the Landy back on the road by Saturday.
think I'll try "easing" the fit a bit with some emery cloth.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
i did slightly bur up the top of mine doing it and it took a few hits, i had the swivel kit (inc ball) that paddock do, its a ****part ball but the rest was boxed in some bearing companies boxes i the bins were emptied today or i would tell you the brand
oil dripper
Well-Known Member
- Posts
- 5,659
- Location
- Here i think
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
yea - the balls are ****part, the bushes are Karsons.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
thems the ones, red n yellow boxes? with mine i coated everything in the gods juice(wd40) and tapped them in (making sure it was all clean first) the other way you couls try is stick yer railko in the deepfreeze overnight stick yer ball in the oven to heat it then it should drop right in, its how i do valve guides
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
try puttin a leading edge on them so they dont have hard corner i bought complete set up as you have they are tight but rest of job is easy and parts seem good quality
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
I couldnt get my old ones out, they were that tight.
And as was just said, your first sketch is correct for the seal.
And as was just said, your first sketch is correct for the seal.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
i didn't have to take me old ones out due to new ball, but if i were i would be tempted to use CO2 to freeze them so they contract the a couple of clouts should have them out
GRUNT
Well-Known Member
- Posts
- 8,911
- Location
- On the lake Geneva shoreline.
If there that friggin tight there's summat up. They should be owt between size fer size or no more than a couple of thou interferance fit no matter who made them, measure the ****ers check em fer being parallel an have a look at the hole there going in fer lumps an stuff.
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
Done the fookers!
Bushes spent the night in the freezer, balls got well heated up wiv me hot air gun, then under the 12 tonne press and in they went easily.
Thanks fer yer help and suggestions.
Bushes spent the night in the freezer, balls got well heated up wiv me hot air gun, then under the 12 tonne press and in they went easily.
Thanks fer yer help and suggestions.
baggyjim
New Member
- Posts
- 2,063
- Location
- gillingham dorset
was going to reccomend looking at them as tweets head and at least you would get some pleasure out of hiting them hard
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
see i can do science me
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
I'll save that pleasure for the clay pigeons tomorrow!was going to reccomend looking at them as tweets head and at least you would get some pleasure out of hiting them hard
HybridGirl
New Member
- Posts
- 5,393
- Location
- Bucks.
I'll save that pleasure for the clay pigeons tomorrow!
Woss the point in shootin clay pigeons tho? Snot like yer cun mek a pie out o them. Well not one that dun't break yer teef and taste ****e.
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
mornin HB
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,091
- Location
- Kernow - Near England
yer kin paint peoples names and/or faces on em, then blow em ter bits wiv a 12 bore, wivout gettin locked up!Woss the point in shootin clay pigeons tho? Snot like yer cun mek a pie out o them. Well not one that dun't break yer teef and taste ****e.
HybridGirl
New Member
- Posts
- 5,393
- Location
- Bucks.
Is it that time agen already?? I best brush me bed head un get some coffee..
