Series 2 Q Insurance

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Turboman said:
So more the support members underneath than the alloy skin?

Not certain, but those might be the same as the supports on a Defender, and they are avaialble.
Click to expand...
Lots of ally missing, had to fudge behind it so i could still bolt it down. It's likely worse with having sat for a while too :(
 
kermit_rr said:
Lots of ally missing, had to fudge behind it so i could still bolt it down. It's likely worse with having sat for a while too :(
Click to expand...
If it is under cover, it probably hasn't gone much worse. It is getting wet that really sets off the corrosion, which is caused by alloy and steel close together. So when you rebuild it, if you put plastic, or any insulating material, between the parts, it doesn't happen again.
 
Turboman said:
If it is under cover, it probably hasn't gone much worse. It is getting wet that really sets off the corrosion, which is caused by alloy and steel close together. So when you rebuild it, if you put plastic, or any insulating material, between the parts, it doesn't happen again.
Click to expand...
Getting we isnt too bad, as long as its in the open and the air can dry it out
 
But ppl are paying that, they are making them better than what they came out of the factory... galve chassis !!
 
You must log in or register to reply here.

Similar threads

Stev
suspension in extended mode and Suspension failure
2 3 4
Replies
68
Views
2K
Stev
Stev
M
L-Series Alternator blocked by Power Steering
Replies
3
Views
607
GrumpyGel
GrumpyGel
N
Wheel resistance
2
Replies
39
Views
2K
steve2286w
steve2286w
O
Freelander 1 Tyres, coolant, filter, sunroof: Qs about the FL1, please assist!
Replies
3
Views
674
GrumpyGel
GrumpyGel
Gunter Shingleditch
Freelander 1 TD4 puff of smoke on start-up, stinky exhaust and shudders at 1000 RPM - SOLVED
Replies
15
Views
2K
kernowsvenski
kernowsvenski
Back
Top