Prop shaft

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

goonarmy

Beer tester
LZIR Despatch Agent
Posts
44,915
Location
Hornchurch
P4040379.jpg
this is the prop i have on the front of my rangie.Im looking to replace it but it appears that there are a lot of different types on the market, its an auto 3.9 on a j reg.What one do i need?Cheers
 
I might have sed it before - but sometimes the nipples get blocked - worth removing em and blasting grease thru em off the prop or UJ to ensure yu can get grease thru them.
 
Right, I got 2 gooduns ear that'll fit.
1. The original one that came off me 90. No play in the splines, just fitted with brand new Hardy Spicer UJs. 30 squids plus post.
2. A nearly new Paddocks one, that was on me 90 for about 2 weeks before I gave up and bought a wide-yoke one. 40 squids plus post.
 
nipples are fine the grease pumps straight out the sliding joint(which doesnt have a cover-suspicious) so suspect any seals are perished.If the ujs are anything too go by the prop aint seen grease in years.Did for the rear diff.
 
i seem to remember summat about all pre-cat models are the same but the later ones with cats have a solidd front prop? :confused:
Theres ones on ebaywhich say are for autos and one that say for cats???!?!?:confused:
The one i think i want from paddock is £$£$£$£$£$£$.
 
Back
Top