SDA
Member
- Posts
- 39
- Location
- newcastle upon tyne
just another annoying problem guys, can anyone tell me how to make hazard lights to flash when arming alarm, can it be programmed separately.
programme alarm to work indicators
- Thread starter SDA
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lowfat
Active Member
- Posts
- 427
- Location
- Cornishwall
Its A BECM function on the p38. You can select side lights or indicators.
With a Testbook, big Faultmate, maybe the new Nanocom - you get the idea.
- Posts
- 58,170
- Location
- Preston Lancs.
hippolover
New Member
- Posts
- 672
- Location
- Perthshire
Mine don't flash on locking/unlocking. I know there is a programme to reset it to either sidelights or indicators however my local 'specialist' can't manage it and says there must a fault in the BECM. £60 please sir to tell me that.
dougdotcom
Active Member
- Posts
- 605
- Location
- Langley Mill. Nottingham
It could be the Alarm has been dissabled then nothing will flash, if not the settings have jumped to side lights in the Becm. 
SDA
Member
- Posts
- 39
- Location
- newcastle upon tyne
Thanks guy's sounds like it's gonna stay the way it is
Similar threads
