Disco 4 (LR4) Power Start/Stop Module

Hi All, have had an issue with the Eco light being on all the time and stop/start not working (D4 2016). After both batteries were sorted this has now been diagnosed as a faulty stop/start module (LR067367). I have managed to source a new one of these but my question is does anyone know if its a simple replacement job (DIY) or will this new module need to be programmed/set up for my vehicle i.e. fitted by someone with the access to the LR computers/kit? Anyone had any experience in changing these? Only thing I can find online is around either the battery or the start/stop switch on the dash.
Many thanks in advance.

Hi, if it's really about the LRO067367 confirmed by the B1479-73 DTC(fault code), this one doesnt need programming, the TSB is for NAS modells up to 2015 but the junction box replacement procedure should be the same though there is another suspect for this fault and then programming is needed(see attachements)

sierrafery said:

Hi, if it's really about the LRO067367 confirmed by the B1479-73 DTC(fault code), this one doesnt need programming, the TSB is for NAS modells up to 2015 but the junction box replacement procedure should be the same though there is another suspect for this fault and then programming is needed(see attachements)

Click to expand...

Thank you very much for taking the time to reply to this one Sierrafery - exactly what I was looking for