Picked up our 110 today!

i know bad innit-cheap as though.They were 20 sheets-if they break ill buy some more!
Ours at work are £50 cost!!! buggerthat
...I normally ask for Pete @ Paddocks, he's half intelligent!

i ask for nobody as i don't deal with them...... i popped down to maldon to get my outriggers today........ £30 and some pence for a pair

G-man said:

i ask for nobody as i don't deal with them...... i popped down to maldon to get my outriggers today........ £30 and some pants for a pair

Click to expand...

wuz they freshly worn pants or clean uns?

it was G's inside out back to front day!

foss said:

it was G's inside out back to front day!

Click to expand...

aaaah. Day 4.

Day 5 is commando

ratty said:

aaaah. Day 4.

Click to expand...

Or week 4 if G-man's a pikey

foss said:

Day 5 is commando

Click to expand...

either that or pants on the outside of yer trousers.

Damn & Blast

Glad u are all happy with ur purchase,
I took my youngest to buy my Landy and just as I was about to start the haggle he said ' Dad you have got to buy this truck it's Lush' An expensive mistake, couldn't let him down.

apayne said:

Glad u are all happy with ur purchase,
I took my youngest to buy my Landy and just as I was about to start the haggle he said ' Dad you have got to buy this truck it's Lush' An expensive mistake, couldn't let him down.

Click to expand...

And that's why children shud be seen but never heard!! hope ya kicked him round the house when ya got him home.

Today I put the first coat of paint on the chassis...next Saturday we'll be cutting it for fitting

time for bed methinks...

one happy bunny ... everything from now is a whole lot easier

This weekend...
*
Fabb'd second row inner sills & brackets & welded them on. Loosely fitted body crossmember.
Stripped all front lights off ready for new ones.
Refitted the fuel tank, managed to jump start it with a battery off a Nissan Micra!
Next week is fabricating the door shuts at the front of the tub, fitting tub braces, test fit the tub & put the exhaust on.
*
Pics to follow...
*
Still to do...
*
Drivers front outrigger, footwell repair sections, lots of wiring!, tyres, brakes, front diff, paint/retrim inside, door locks....Mot'd, taxed, insured by Christmas Day??? Hope so, otherwise I'll have to find her another present!

Today...
Fuel tank on properly with sender & pipe, insulated loom, roll bar back on & bump stops & new battery...opened the box with the footwells & tub braces in
Fitting braces tomorrow & maybe exhaust if there's time.

Tub braces & exhaust on today...test fit tomorrow...oooh its gettin closer!!!!!!!!!

Keep it up Foss

Well the tub fit went well, all lines up lovely....just need to fabricate the angles for the rear door shuts,cut a new floor from some ally sheeting & re-route the loom & fuel line as they catch on the tub.
Exhaust is great, except the restored back pressure has blown a hole in the front pipe! BUGGER!
Oh & the dipstick tube is split-BIG LEAK & the front crank seal looks like its leaking!!
I can do most things but changing engine bits int my forte!

the fact that you can identify the leak prob means you know enough to do it yourself with the aid of a manual.

might find some help here.. Land Rover Manuals, Part Catalogue, workshop manual, download pdf files, Landroverweb.com Linking your Landy to the World!

Dipstick oil tube replacement is very simple, undo it, replace it, simples.

Crankshaft seal is a tad different, but not too difficult, plenty of posts relating to it, just search under ' timing belt replacement ' as most people replace the cam & crank seals at the same time.