novicetom
New Member
- Posts
- 32
- Location
- Dorset, UK
Hi People, Forgive me. This is my first Landy and infact my first project vehicle. Previous cars have been the non dirty kind.
So here is the thing, i want to restore her back to here former glory (shes a 1988 110). So the engine seems fine and most of the body is very good for her age however when i started stripping bits off i noticed some very rusty patches, which may be very normal, its underneath the doors and on the triangular bit near the rear side doors. Hopefully the pictures will help show where i mean. see attached
Anyway. the question is, how do i replace these. No i know it will probably need rewelding, but what would these replacement panels be called and where can i get them from? Your help is appreciated.
So here is the thing, i want to restore her back to here former glory (shes a 1988 110). So the engine seems fine and most of the body is very good for her age however when i started stripping bits off i noticed some very rusty patches, which may be very normal, its underneath the doors and on the triangular bit near the rear side doors. Hopefully the pictures will help show where i mean. see attached
Anyway. the question is, how do i replace these. No i know it will probably need rewelding, but what would these replacement panels be called and where can i get them from? Your help is appreciated.
