p38 burnt out

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

niloc1200

New Member
Posts
42
C:\Users\colin\Pictures\2010-09-24 range rover the end
 
Huh, have I missed something here or is it really a blank post?
Best thing for em in my opinion at this moment in time.
Why are they so rattly and plasticky inside, everything squeaks and bangs over the many speed bumps in my area. I had £50 cars that make less interior noise than the 2 ton wonder parked outside.
Looks fekkin great though, nothing else has the same presence.
 
Huh, have I missed something here or is it really a blank post?
Best thing for em in my opinion at this moment in time.
Why are they so rattly and plasticky inside, everything squeaks and bangs over the many speed bumps in my area. I had £50 cars that make less interior noise than the 2 ton wonder parked outside.
Looks fekkin great though, nothing else has the same presence.
You sure its a p38 your driving? :confused: :D
 
You sure its a p38 your driving? :confused: :D

Ye. Ripped the bastard apart today to fit a front foglight switch. Discovered that its been apart before and only half the screws have been used to put it back together leading to what I think is the cause of the rattly and squeaky trim panels.
On the hunt for replacement screws and bulb now, thought I'd do the bulbs in the HEVAC unit while it was out.

Wheres this burnt out pic, I'm with Kooky, need to threaten mine with something too lol.
 
no pics will upload on to the site no matter what i try ! its burnt out good and propper all the interior has gone started from the gear box centre console
 
You can't upload the pics to this site. Use Picasa, photobucket, etc, upload the pic there and link to here using the little 'pic' symbol above the input window.
 
ive got to change the fog light, cruise control and the cigar lighter bulbs been putting it off for ages! you could tell me which bulbs you've used.

None yet but the ones in the switches are different than the ones in the HEVAC unit. Small with a flat head to screw down, looks like a trip to the stealers for those beautys.

The bulb in the fag lighter is a standard small push fit bulb, no holder needed and should be available from your favourite accessory shop.
 
None yet but the ones in the switches are different than the ones in the HEVAC unit. Small with a flat head to screw down, looks like a trip to the stealers for those beautys.

The bulb in the fag lighter is a standard small push fit bulb, no holder needed and should be available from your favourite accessory shop.

thanks, ive got the hevac bulbs already, but just wanted to know the switch bulbs before i ripped the dash apart and find i couldnt get them from anywhere but the stealers.
 
Back
Top