p38 burnt out
- Thread starter niloc1200
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
piccky never worked for me..
JohnP38
Active Member
- Posts
- 619
- Location
- Alton Hampshire UK/Cape Town SA
Think your post is burnt out
everlatesparky
Active Member
- Posts
- 811
- Location
- Sheffield
:nopics:
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
Huh, have I missed something here or is it really a blank post?
Best thing for em in my opinion at this moment in time.
Why are they so rattly and plasticky inside, everything squeaks and bangs over the many speed bumps in my area. I had £50 cars that make less interior noise than the 2 ton wonder parked outside.
Looks fekkin great though, nothing else has the same presence.
Best thing for em in my opinion at this moment in time.
Why are they so rattly and plasticky inside, everything squeaks and bangs over the many speed bumps in my area. I had £50 cars that make less interior noise than the 2 ton wonder parked outside.
Looks fekkin great though, nothing else has the same presence.
kooky_guy
Well-Known Member
- Posts
- 2,410
- Location
- Sandhurst, Berkshire
Yi, I want to see the piccy so I can threaten mine with something next time it misbehaves!
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
i think it may have decomposed..
sillyboy
New Member
- Posts
- 10
- Location
- I live in East london UK.
If your rangy is noisey inside check the boot there may be a body in there this vehicle is one of the quitest on the road, and I can't see the picture either
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
p38on22s
New Member
- Posts
- 324
- Location
- uk--- clacton on sea
had a blue one down at kirby cross catch fire about 6 weeks ago while the woman was driving it, started by the suspension pump and done all the engine bay and pass wing
dougdotcom
Active Member
- Posts
- 605
- Location
- Langley Mill. Nottingham
praps there nothing left so no pic to see.
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
You sure its a p38 your driving?
Ye. Ripped the bastard apart today to fit a front foglight switch. Discovered that its been apart before and only half the screws have been used to put it back together leading to what I think is the cause of the rattly and squeaky trim panels.
On the hunt for replacement screws and bulb now, thought I'd do the bulbs in the HEVAC unit while it was out.
Wheres this burnt out pic, I'm with Kooky, need to threaten mine with something too lol.
tommo138
New Member
- Posts
- 541
- Location
- braintree, essex
ive got to change the fog light, cruise control and the cigar lighter bulbs been putting it off for ages! you could tell me which bulbs you've used.
Hamster97
Active Member
- Posts
- 517
- Location
- Manchester
None yet but the ones in the switches are different than the ones in the HEVAC unit. Small with a flat head to screw down, looks like a trip to the stealers for those beautys.
The bulb in the fag lighter is a standard small push fit bulb, no holder needed and should be available from your favourite accessory shop.
tommo138
New Member
- Posts
- 541
- Location
- braintree, essex
thanks, ive got the hevac bulbs already, but just wanted to know the switch bulbs before i ripped the dash apart and find i couldnt get them from anywhere but the stealers.
see if this works range rover pictures by niloc1200 - Photobucket
Last edited:
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
copy and paste the img code and they come out like this
I reckon that'll polish out
I reckon that'll polish out
