If they've rotted, some heat, oil and a good pair of mole grips.
If they've rotted, some heat, oil and a good pair of mole grips.
Or cut the buggers off with a grinder
Then cut and make 5be old bolts flush and drill then out to fit bolts if you're using the part again
Nice oneÀ good question, get in there lad and measure them.
As a rule, any bolt length should leave at least 5mm sticking out of the nut once it's tight
, I've just snapped a bolt so this is going to be fun, only got hand tools.
Just measured it at 5-6 cm which translates to 50mm so they should be enough.À good question, get in there lad and measure them.
As a rule, any bolt length should leave at least 5mm sticking out of the nut once it's tight
I believe standard are actually M12 heads as I had an M12 socket get stuck on the head of the bolts when it snapped .
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
