discodreama
New Member
- Posts
- 57
Hi all, Car is currently undergoing a facelift conversion, Just waiting for the hammerite to dry! My problem is this, I done the downpipe gaskets the other day, Fookin nightmare, Dont think they are original at all, Ones a dodgy subaru cat and the other is an interference fit to say the least, But i done it and its all sealed up... Now, The left bank (drivers side) sounds as if its missing on one, It is, Its missing on the rear cylinder closest to driver, I have had the ht lead out and swapped it with another, No spark, Its definitely not sparking on that cylinder, Does anybody know what could cause this as the rest are working fine and my bastard hands wont fit where they need to to fiddle with the coilpacks. HELP!!!!!!!! 
P.s I took the ht lead off the cylinder in question tother day to tighten the manifold back on and ran the engine for 10 mins with out the lead on the plug, (excitement is great) this might have done something maybe?
P.s I took the ht lead off the cylinder in question tother day to tighten the manifold back on and ran the engine for 10 mins with out the lead on the plug, (excitement is great) this might have done something maybe?
Last edited:
