bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
need to change the transfer box on my defender for a disco box for better motorway speeds. not sure which gearbox i have, are all transfer boxes the same?
no doubt a stupid question
- Thread starter bevhelee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
How old is your defender? What engine?
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
1991 200tdi
- Posts
- 83,296
- Location
- Embasinga stocæ
reverse to the left and up? Have yu looked at the Ashcrofts site?
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
yeah reverse up and left, what will ashcrofts site show me?
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Right. If it has it's original gearbox it'll be an LT77. Tranny box off a 200tdi disco will go straight on you might have to change the handbrake cable fittings I think. Pretty sure the same transfer box was used on the later 300tdi models but someone here will be able to confirm this.
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
so as long as i find a transfer box off a disco 200tdi i shouldn't have too many issues
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
are the handbrake cable fittings easily available as was hoping to change it on next trip to uk which will include finding and buying it
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
You won't have any issues. Call me a spamming **** if you like but here.
Land Rover Discovery LT230 Transfer Box on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 21-Mar-09 20:19:26 GMT)
Land Rover Discovery LT230 Transfer Box on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 21-Mar-09 20:19:26 GMT)
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
You've already got any bits you might need to swap over on the one you've got.
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
thank you
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
thanks for the link but way too far, will be driving up from france and staying in birmingham so anglesey, bit too far
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
thanks again
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
i fitted a disco transfer box to my 90 but i had to drill and tap 2 very shallow 8mm threads on the rear bearing support casing to take my 1986 defender handbrake cable mount/adjuster Jai
jzcktv
New Member
- Posts
- 646
- Location
- Near Reading, Berkshire UK
Hi Bevhelee,
As an alternative you could fit an Overdrive instead, which will be much less work. This will give you another 10 mph roughly and much less noise. Plus it means you don't change the original gearing ratios.
hmmmm what to do....
option 1 - spend probably less than 80 quid on a good used 1:22 ratio tranny box from a disco and spend approx 3 hours fitting it
option 2 - spend 1500 quid on an OD and spend an hour fitting it
