Disco 2 New car, few questions

dimbers · Sep 9, 2018

Well after looking at some real rotten sheds, i finally found a nice 04 es premium. Solid chassis, no warning lights on and great bodywork.

A few issues i could do with help tho.
Parking sensors dont work, select reverse and i get no audible sound, and the light flashes on the switch.

Gear crunches into 2nd, but if i change slowly its fine, but it crunches into 1st, even at standstill. Also the gear lever doesnt centralise, it falls to the left.

Anway here she is

neilly · Sep 9, 2018

Just to add to your questions, make sure you have the EKA code.

Cheers

hughdavies · Sep 9, 2018

bias plate top of gearbox broken

dimbers · Sep 9, 2018

Also i get power surges, i was told it had been tuned, and it does go well. But if i floor it i get blocks of flat acceleration. If i feather the throttle its seems to be fine

dimbers · Sep 9, 2018

neilly said:
Just to add to your questions, make sure you have the EKA code.

Cheers

EKA code?

hughdavies said:
bias plate top of gearbox broken

That would account for it not centralising but not the crunching?

kevstar · Sep 9, 2018

dimbers said:
EKA code?

That would account for it not centralising but not the crunching?

EKA code is the security entry code by putting the key into the drivers door lock & turning it in a sequence of times
to gain entry when the remote button is lost or battery is flat...…………..

Crunching is a common problem on these boxes try changing slower into gear they don't drive
like cars or double clutch

brian47 · Sep 9, 2018

dimbers said:
EKA code?

Check out @neilly's excellent piece, including the attachments at:-
https://www.landyzone.co.uk/land-rover/handy-buying-alarm-info.311291/

dimbers said:
That would account for it not centralising but not the crunching?

Very often many of the gearbox problems can be sorted by doing an oil change in the gearbox. The Td5 gearbox can be a bit touchy about its oil.

The reversing alarm having a flashing tell-tale light on the switch usually suggests that the PDC ECU is faulty. It's a straightforward plug-n-play replacement. The ECU can be found behind the trim just inside the rear tailgate on the passenger's side of the vehicle.

discool · Sep 9, 2018

dimbers said:
EKA code?

You will require this code and the knowledge of how to enter it to override your security system. But don’t panic, I’ve have now 21 years of disco ownership and never used it. If you do then u have a problem that needs sorting.

dimbers · Sep 20, 2018

Thanks for all the advice

I bought a new speaker for the pdc, and now they are working perfect.

As for power surges, i cleaned the map sensor which improved things, freed up the wastegate which wasnt too bad but needed doing, then disconnected the maf and she flies. It has been mapped or chipped not sure by who though. Anyway i do sometimes get a slight miss if i floor it now. I hope its just because maf is disconnected and when i fit a new one it will sort that problem

Disco 2 New car, few questions

dimbers

Active Member

neilly

Well-Known Member

hughdavies

Well-Known Member

dimbers

Active Member

dimbers

Active Member

kevstar

Well-Known Member

brian47

Well-Known Member

discool

Well-Known Member

dimbers

Active Member

Similar threads