lost locking nut KEY

ok heres the deal, lost locking wheel nut KEY, had to have the NUT forced broken off to change wheel.

pics attached (hopefully)

cant see no letter/no. so guessin they aint landy genuine articles?
cant remember if KEY had any identifying features either.

soooo....where do I go from here?!how do I get em off (I didnt break the one to replace the tyre, mr breakdown man did )

looks just like my 90 1's mate take it into the local stealers parts department they might be able to help

if not - try a locksmith (daft i know) coz alot of them have "master" keys for this sort of thing.

Hammer a Slightly small socket onto the nut and that'll shift em Think it's a 20mm but you'll know as soon as you try it. Oh and it has to be a multipoint socket not a 6 sided one.bastids getting the socket off again but it's the only way to DIY em. Or drive down local tyre fitting place and they usually have the gear for getting em off. Then they're usually loads of sets of locking wheel nuts quite cheap on fleabay

buckshot said:

looks just like my 90 1's mate take it into the local stealers parts department they might be able to help

Click to expand...

i'm sure they fookin would caaaa CHING!!

or if yu dont mind forking out £20.....

here.

dont go beating it, weld a tyre lever onto it

MHM, that cant be for real?wats the point of havin em if ya can buy em online?or you yankin me

this mite help, Rafa............

here

Sean said:

dont go beating it, weld a tyre lever onto it

Click to expand...

What about the other 3? he's gonna look daft with 4 tyre levers stuck to his wheel nuts. The socket trick works fine I did it to Mrs B's when her locking key snapped.

nope i aint pullin ya plonker - just :googleit:

rafa_surf said:

MHM, that cant be for real?wats the point of havin em if ya can buy em online?or you yankin me

Click to expand...

Course you can. I think there's only 4 combinations for the landy locking nuts anyway. if you go to the dealer they'll sell you the locking key for it.

mountney ltd - dunno how well this will come out....

AFTERMARKET WHEELS
Not all aftermarket wheels take the standard wheel nuts/bolts supplied with the vehicle.

To enable you to select the correct lock for your wheel we require the following information.

1. Manufacturer, Model and year of vehicle.

2. Make and type of aftermarket wheel.

3. Nut or bolt application information (select from the chart).


Style 1 Style 2 Style 3 Style 4 Style 5 Style 6



Part No Style Seat Type Hex Size Thread Size Dim 'A' Dim 'B' Dim 'C' Washer inc
A101 1 Taper 17mm 3/8" unf
A102 2 Taper 17mm 3/8" unf
A108 3 Taper 17mm 3/8" unf Integral
B101 1 Taper 19mm 12 x 1.5 mm
B108 3 Taper 19mm 12 x 1.5 mm Integral
C101 1 Taper 19mm 12 x 1.25 mm
D101 1 Taper 19mm 12 x 1.25 mm
G101 1 Taper 21mm 1/2" unf
B201 4 Taper 17mm 12 x 1.5 mm 30 mm
B211 6 Taper 19mm 12 x 1.5 mm 5 mm 19 mm 27 mm Taper
C201 4 Taper 17mm 12 x 1.25 mm 30 mm
C207 5 Flat 19mm 12 x 1.25 mm 35 mm
EE201 4 Taper 17mm 14 x 1.5 mm 30 mm


Click Here for Our Application List

fook - no pics - but if yu look on their site - it has em all.

ooo aye, came out fine MHM. rekon its be that screwfix option then pikeys...this is gonna end in tears you know....

Full set of new ones here. Land Rover Discovery 2 locking wheel nuts (5) BA017c/5 on eBay, also, Land Rover, Car Parts, Cars, Parts Vehicles (end time 27-Feb-09 11:25:03 GMT)

Whoops they is for a D2 but they're plenty more on there as well

cheers pikey!

go down to your local dealer. I wen tto mine when i lost my key. It was a really old stly LR locking nut. The service centre manager there was really helpful. If they have one which fits then they should just losen it off for you.

I have several special tools for removing em. Just give me a holler if you want me to do it or if you wanna borrow em.