I've Been Really Silly! Help Please

aup folks, went out laneing yesterday an had a bit of a run in with a very hard bank
the result was i ripped off the rear bumper end cap near side, an was gonna take them both off an use tread plate to cover it up, but have since changed my mind, coz it might look ****e,
problem is i threw the old end cap (and bracket) in the skip at work, thinking a new one would come with a new bracket

BUT they dont,

and now the skip at work has been emptied an i don't have a bracket:doh:


does anyone have one in the back of their shed i could pike or buy? PURLEEEASE

not bothered if its bent as long as it can be straightened out.

thanks


Nick

ps, its an 300tdi disco r reg

:nopics:

I stuck mine on with stuff called 'sticks like s**t' from a buliders merchant.Been laning since and it's still attached

Disco71 said:

I stuck mine on with stuff called 'sticks like s**t' from a buliders merchant.Been laning since and it's still attached

Click to expand...

i got a new one just no bracket

goonarmy said:

:nopics:

Click to expand...

there you go goonarmy

Ah tis a mere flesh wound!Me neighbour drove into mine the other day and did me indicator and end cap.Piccies here http://www.landyzone.co.uk/lz/f13/surrey-greenlanes-67638-14.html but mine was never prestine to start with!Skip diving not an option?

private me i got one ya can have ! you aint to far from me so ya can tek it off ya sen ! is ya bumper bent ? ya can have the bumper if your is fcuked.

vivnap said:

private me i got one ya can have ! you aint to far from me so ya can tek it off ya sen ! is ya bumper bent ? ya can have the bumper if your is fcuked.

Click to expand...

aup mate an thanks for tha offer very good of ya

i got a bracket sorted now thanks got one in post from 'the other channel', the bumper was bent but i got the hi-lift under it an jumped on it till it was nice an straight
i must of looked a right cu#t in the works car park then hammered the end straight but if it dont look right when it's done i'll pm ya about the bumper.

thanks

Nick

nickh75 said:

aup mate an thanks for tha offer very good of ya

i got a bracket sorted now thanks got one in post from 'the other channel', the bumper was bent but i got the hi-lift under it an jumped on it till it was nice an straight
i must of looked a right cu#t in the works car park then hammered the end straight but if it dont look right when it's done i'll pm ya about the bumper.

thanks

Nick

Click to expand...

its not goin any where so let me know