interior lights not working.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tommo138

tommo138

New Member
Posts
541
Location
braintree, essex
can anyone help, there doesnt seem to be anything on a search with a similar problem. Havent had my p38 for that long and noticed that no interior lights work when you open the doors, the front spot lights and rear passenger lights work when switched on manually. I noticed the front main interior light doesnt come on at all and if you try switching it on the button doesnt click. The boot light also is not working!Also the indicators dont flash if you arm or disarm the alarm(dont know if they're suppose to!) Starting to p*ss me off when trying to find something in the dark! Any help would be a great help!
 
hi, i had this the other day all interior lights plus boot light not working,i found out that if you press the middle button on the front interior light cluster for three seconds there should be a short bleep and message on dash saying interior light on.hope it works for you!!!!
 
Yep chas33 is right, its some kind of synchronisation thats needed. This happend to me when my + terminal worked loose from the battery.
 
tommo138 I have exactly the same problem with my range rover. Interior lights are switched on as shown on the info display, door switches are working, all bulbs are ok, all fuses ok and puddle lights work but no interior lights. All the bulbs have a live feed they are just missing the switched negative.
 
Just an update Ive just fixed the fault. All I did was disconnect the battery for 30 seconds and reconnected it and everything works as it should. Disconnecting the battery did set off the alarm though so be prepared for the noise. Just be carefull to make sure the car is unlocked, alarm is not armed and you have the radio code and key access code just incase.
 
Hi folks,

Son just had same problem after changing interior bulb. Held centre front button in for about 3 seconds and problem gone.
Many thanks
 
mine just suddenly has started to do this. No indicators flash on unlock or lock, no interior lights coming on either.
Went out to just now and I can still hear a feint beep every few seconds from the dashboard. If I hold down the middle button on the dome light console for 3 seconds i can toggle between inter lights on or off.
when I select, off ,the beeping stops. I pressed the middle button again and still no lights???? really confused.

how do I fix this?
 
Just to update this thread.....
So if you hear a feint beep from the dash- it means the interior lights have been set via the light dome (middle button) as ON. If you set this to OFF then the beeping stops, but you still have no interior lights functioning.
Disconnecting the battery for a short while will fix the interior lights problem and no more beeping!
 
1/28/2012 10:04 Just had the same issue. I completed the following,
A) Discocennected the battery
B) Cleaned terminals
C) Checked bulbs in the dome light
D) Cycle the switch to turn interior lights off and on in the interior
E) Checked all the fuses
F) Rest it by reattaching the battery.
Didn't Work

My Fix was the following:

I inserted the Key into the drivers door access and rotated it back and forth while spraying a lubricant in the slot. (Not the best to use silicon for locks but i did to improve the contact). The light lit after a few times of pushing the key in and out while applying spray lubricant.

I am sure it was just a dirty contact is my resolve. Thank you for everyones inputs on this site. I own two P38 4.6's and the electrics are fun to troubleshoot as they get older!
 
I had no interior lights after my p38 was returned from my sister after a months loan. Held the switch on the main light until a beep and my interior lights are now working as they should. Thank you for the info everyone.

Where are the door switches for the lights? Are they within the door internals?
 
Sideline said:
I had no interior lights after my p38 was returned from my sister after a months loan. Held the switch on the main light until a beep and my interior lights are now working as they should. Thank you for the info everyone.

Where are the door switches for the lights? Are they within the door internals?
Click to expand...
Yep, built into the lock mechanism
 
mckee3210 said:
1/28/2012 10:04 Just had the same issue. I completed the following,
A) Discocennected the battery
B) Cleaned terminals
C) Checked bulbs in the dome light
D) Cycle the switch to turn interior lights off and on in the interior
E) Checked all the fuses
F) Rest it by reattaching the battery.
Didn't Work

My Fix was the following:

I inserted the Key into the drivers door access and rotated it back and forth while spraying a lubricant in the slot. (Not the best to use silicon for locks but i did to improve the contact). The light lit after a few times of pushing the key in and out while applying spray lubricant.

I am sure it was just a dirty contact is my resolve. Thank you for everyones inputs on this site. I own two P38 4.6's and the electrics are fun to troubleshoot as they get older!
Click to expand...

From what I understand of the door mech lubing the lock will only benefit the use of the key and nothing else......?
 
You must log in or register to reply here.

Similar threads

M
Puma 2013 Head unit and interior lights not working
Replies
0
Views
283
Mattrmerrick
M
P
L322 Flickering rear lights
Replies
18
Views
906
Parkheadbhoy
P
D
Tail lights not working
Replies
2
Views
287
miktdish
miktdish
D
Cabin interior light not working
Replies
1
Views
108
Hellsteeth
Hellsteeth
H
Indicator front light
Replies
4
Views
313
andyfreelandy
andyfreelandy
Back
Top