Hertfordshire Lanes?????

Evening all.

Is anyone out and about this weekend?

Look's like your recovery evening was a good laugh.

Hello B3aker,

Hows you?

I wont be out I have axles to change and a CV to do. Plus strip a Discovery and try and get rid of the shell before Rach Kills Me!

jai_landrover said:

Hello B3aker,

Hows you?

I wont be out I have axles to change and a CV to do. Plus strip a Discovery and try and get rid of the shell before Rach Kills Me!

Click to expand...

Would that be a three door shell? If it is, are the side panels in decent condition? particularly the bits just behind the drivers door .. mine have a touch of the aly-rot ..

If OK to the above, how much would you want for both side panels? Or full shell if necessary?

jai_landrover said:

whats Saf done now? Lol

Click to expand...

She doesn't need to DO anything!

Oh nothing much... I just think that ****ing off Dad is a habit nw, so much that she doesn't even need to try!

Jesus I am going to name my next Landy after her!

its a 5 door Paul sorry you are welcome to any bits that have not already gone hell the shell isnt that bad compared to alot of motas on the road. but the front panel has been cut away around the rad.

Kris 300TDI said:

Hi everyone, looking to make it to next months pub meet, but probably won't be able to do any laning for a few weeks, well skint since getting back from Cornwall.

Click to expand...

I have money for you

Kris 300TDI said:

Hi everyone, looking to make it to next months pub meet, but probably won't be able to do any laning for a few weeks, well skint since getting back from Cornwall.

Click to expand...

.:mil69::mil69::mil69: another emmett cleaned out:mil69::mil69::mil69:

Hi Booger, got space in the workshop. Give me a call and we'll get it in and sort it out, CHEERS

kris mate summit weird is going on with the clutch. done slave, and everything works. but after longer distances on the motorway it sitl revs if i put the foot down properly - but only in 4th. all other gears seem ok, cept the fact that the clutch is high as a giraffes ass

OK mate, if you get chance in the week bring it down the workshop and i'll have a look, CHEERS.

will see if i can fit summit in - im off on friday though. its odd, its only 4th, and only after a long old stretch on the motorway - cept the clutch being high as fook

jai_landrover said:

Hello B3aker,

Hows you?

I wont be out I have axles to change and a CV to do. Plus strip a Discovery and try and get rid of the shell before Rach Kills Me!

Click to expand...

helo how is every1, wot condition is the shell in and is it for sale, stil not got money for new panels so am gona try and get second hand bits, realy need it b on the road lol.

you can have the shell if you come and take it off but there are no panels on it mabe one rear quarter

jai_landrover said:

you can have the shell if you come and take it off but there are no panels on it mabe one rear quarter

Click to expand...

thanks its the boot floor and front inner whell arches im after, il c if i can borrow a trailer to pick it up.

Ref Carpy clutch issue.

Your description of the problem with your clutch is common problem.

Without seeing the item in person I can only be 99% sure it is the problem.

You have incorrectly set the clutch hight and in doing so incorrectly set the clutch pedal without having enough free play.

You need to readjust the pedal hight and make sure you have some FREE PLAY in the pedal. If you do not allow the master cylinder to completely bottom out then pressure is retained each and every time you press the clutch. Long journeys and vibration will keep up the pressure.

You will find the clutch will slip more and more until you fix the free play issue.

Unless you have done something really crazy then this IS your problem. It is a classic mistake made by home mechanics and one I have seen and rectified personally many times in the past.

The gear you are in has no relationship to the problem other than the fact lower gears will have an easier time accelerating the car and at present you can transmit enough torque for this to happen. Unless you fix the problem you will find the clutch will slip in lower and lower gears until you burn out the clutch and then that cheap master cylinder has cost many times more bucks than you originally planned.

You will find the procedure for setting enough free play in all good haynes or land rover manuals.

Good luck.

I presume we're having our pub meet as usual, in which case I hope to see you all on Wednesday. The Rangie is running again after a bit of front prop shaft surgery this weekend just got a curious intermittent misfire to eradicate (dizzy is looking favourite).

Hope you're all well and had a good bank holiday.

Hi Kev,
Good bank holiday Ta, Big Thank you to Gibbo Phil for ferrying my Chassis back from Wiltshire. I owe him a pint or two. Chassis being built up for a trialler. Will be ebaying some stuff asap to pay for the hybrid. Power steering box 4 bolt, Disco seats, wheels n tyres broncos, mirrors door parts etc.

Well Hi Kev... been a while, in fact havent seen you since the last pub meet! Hope things are good... hopefully see you on Wednesday.

Who went out to play today?