Help ABS TC Handbske warning lights on ?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pump from e*** relay was main dealer as e*** more expensive & only one listed !!
Ok well hubby is mechanic but we all know they are the worst kind with their own cars !!! Pehaps I should get him to remove old unit and have relay on standby just in case its required - I just thought £46 was a lot as its half the cost of the 2nd hand pump unit we just bought !
Maybe ask main dealer if can return for refund if not required as it easter a weekend and they will not be open !!!
 
MrsChris said:
Pump from e*** relay was main dealer as e*** more expensive & only one listed !!
Ok well hubby is mechanic but we all know they are the worst kind with their own cars !!! Pehaps I should get him to remove old unit and have relay on standby just in case its required - I just thought £46 was a lot as its half the cost of the 2nd hand pump unit we just bought !
Maybe ask main dealer if can return for refund if not required as it easter a weekend and they will not be open !!!
Click to expand...
Take the top cover off the relay and look at the contact, if it's clean and not burnt it should be OK.
 
Datatek, Wammers & Saint.V8 BIG THANK YOU :)

New brake pump fitted successfully & brake fluid change complete - all lights gone out and the brakes work yay ! :D:D:D
 
Hi
We fitted back in march this year a new pump (& had pressure switch on it) with new brake fluid. System ran perfect until couple weeks ago. On applying brakes - whether lightly or hard the abs,tc & brake warning lights flash on then go out, he pedal does not go hard but I think it is not as responsive as it was. We did a re- bleed which made a difference for a couple of days.

Now anyone have any ideas before we pay for a diagnostic read pretty please.
Alos separate to brakes I know but rf receivers - ours is a 95 p38 can we fit a 2nd generation one to it and will keys need re-programming if we do ?

Thanks in advance once more :dance:
Sam
 
MrsChris said:
Hi
We fitted back in march this year a new pump (& had pressure switch on it) with new brake fluid. System ran perfect until couple weeks ago. On applying brakes - whether lightly or hard the abs,tc & brake warning lights flash on then go out, he pedal does not go hard but I think it is not as responsive as it was. We did a re- bleed which made a difference for a couple of days.

Now anyone have any ideas before we pay for a diagnostic read pretty please.
Alos separate to brakes I know but rf receivers - ours is a 95 p38 can we fit a 2nd generation one to it and will keys need re-programming if we do ?

Thanks in advance once more :dance:
Sam
Click to expand...
Could be the brake reservoir sphere, how often does the pump run.
If you are going to replace the RF receiver, you need the Mk3. It's plug and play, no re-sync needed:)
 
Datatek said:
Could be the brake reservoir sphere, how often does the pump run.
If you are going to replace the RF receiver, you need the Mk3. It's plug and play, no re-sync needed:)
Click to expand...

Thanks will look for mk 3 rf :) The pump is running nearly every time you push brake pedal
 
You must log in or register to reply here.

Similar threads

Dieselmec 42
Front abs kicking on
Replies
3
Views
722
Mark Piercy
Mark Piercy
s8ndst0rm
Warning Lights - AMR2628
Replies
4
Views
911
s8ndst0rm
s8ndst0rm
Blob
L322 ABS Re-learn Procedure? Is there such a thing?
Replies
5
Views
435
Blob
Blob
rugbynut129
NO ABS/TC/HD lights on dash
Replies
5
Views
1K
sierrafery
sierrafery
D
ABS Light
Replies
1
Views
283
Anaconda
A
Back
Top