Handbrake.... Again!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yeh, i pulled that other lever, so i could get the cable in, and as far as i could tell it just slotted in.

Btw, if you're wondering, why i didn't look before i took the other one out, it was kind of a mess, and wouldn't budge, so i just cut the bleeter off in the cab and in the shoe, so i could remove it.
 
Zednero said:
Yeh, to the part where it enters the drum yeh? I done that :) Then it retracts back?
Click to expand...

theres a spring clip that holds outer cable to back plate but the inner cable has an outer spring which pushes against the shoe lever , to fit cable to lever spring must be pulled back
 
:doh:

52947d1386276834-handbrake-again-img_1871.jpg
 

Attachments

  • IMG_1871.JPG
    IMG_1871.JPG
    141.1 KB · Views: 231
Whats that clip thing, called, that holds the cable in place, just by the entrance there? I snapped that? :doh:

Mad Hat, thankyou for your pics by the way, most helpful!!! (Anyway i can repay you?)

Will be taking it apart and starting again tomorrow, soon as i finish work, and woke up again. (Night shifts :( )
 
Whoop! All done, thanks guys!

Just one little problem now. Handbrake lever button keeps sticking. Tried spraying some wd40 on the mechanism, and it helped a bit, but hasn't cured it. Any ideas?
 
You must log in or register to reply here.

Similar threads

dag019
Handbrake differences
Replies
13
Views
885
dag019
dag019
T
Disco 2 03 Discovery 2 TD5 no start
Replies
8
Views
585
Anaconda
A
S
300tdi ac not working
Replies
9
Views
1K
spam31
S
W
Rear DLR not working
Replies
8
Views
724
Dragonwalker
Dragonwalker
Corne215
manual transmission not selecting gears when idle
Replies
16
Views
1K
Corne215
Corne215
Back
Top