Central Locking

Hi everyone, I've got an issue that I can't seem to work out......everything is working fine apart from the drivers door, it won't lock or unlock using the fob but it will if I use the key I've changed the locking mechanism/ actuator and still the same. I've checked the rf reciever and the fob with the nanocom and all is good as both were replaced last year. I can here a slight click when I push the buttons on the fob but that's all. Could it be a fuse somewhere or a relay? Any help will be greatly appreciated as my head is mashed now

td5jay said:

. I can here a slight click when I push the buttons on the fob but that's all.

Click to expand...

This means that the electronic side is working cos the signal gets there... if the latch mechanism wasnt bran new but some scrapyard part send it back and ask for refund cos that's the problem...if the latch is new well speak again but not untill i'm 100% certain that it's working.

Similar issue with rear door on D2, it was the plastic clip that holds the actuator rod.

Thanks guys for all the advice....turns out the lock was siezed and so was the replacement,actuator was trying to work but couldnt good lock with only 75k on it and all is working great