slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
only if he sends a large sum of money
Got me V8 III
- Thread starter Grippa
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,254
- Location
- Embasinga stocæ
its gorn very quiet on the MOT front 
- Posts
- 83,254
- Location
- Embasinga stocæ
its still very quiet on the MOT front
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
Yer think he's sulkin ?
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
FKN hell guys! I do have a life & job outside o' fkn Landies y'know.
Fail.................But on 1 wheel bearing excessive play.
That's it (you don't count loose nuts on 1 leafy U bolt & a joint on the flexi section of the eggsauced blowing, cuz they're 2 minute jobs). Oh, & an advisory about a cut in one tyre, but they're getting changed anyhoo.
So RESULT! Other than that sound as a round pound & the tester was well impressed by the chassis & the amount of new & good bits unner there (new ball joints, 11" drums, blah de blah) & general condition.
V happy bunny me, so you can say what you like about me poor taste on snorks, dunt care!
Slob, eggzakly what d'ya want piccies of?
Fail.................But on 1 wheel bearing excessive play.
That's it (you don't count loose nuts on 1 leafy U bolt & a joint on the flexi section of the eggsauced blowing, cuz they're 2 minute jobs). Oh, & an advisory about a cut in one tyre, but they're getting changed anyhoo.
So RESULT!
Other than that sound as a round pound & the tester was well impressed by the chassis & the amount of new & good bits unner there (new ball joints, 11" drums, blah de blah) & general condition.V happy bunny me, so you can say what you like about me poor taste on snorks, dunt care!
Slob, eggzakly what d'ya want piccies of?
- Posts
- 83,254
- Location
- Embasinga stocæ
so we no wot yu doin this w/e
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Cheers chap. Can prob' just adjust it out. Little job fer me fer Saturday then I can start the 'prettying' up.
mondo
Banned
- Posts
- 7,631
- Location
- Yorkshire / Buckinghamshire
Nice one marcus !
not the fail bit . just the not much to fix bit
not the fail bit . just the not much to fix bit
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
maybe the g/box has exploded and he's suffering a mental breakdown
yella
New Member
- Posts
- 15,991
here ya go mate, a celebratory picture for ya
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
do you thinks that's where he's got to?? making another aquatic snorkel?
yella
New Member
- Posts
- 15,991
maybe he's cleaning the fish tank
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Nope no bluddy fishtanks burfday bloke. Oi Slob, did you read any previous posts. I got back & posted the outcome as soon as I bluddy cud!
Sooooo, what pics d'yah want exactly?
Sooooo, what pics d'yah want exactly?
- Posts
- 83,254
- Location
- Embasinga stocæ
dont ask that Mucus - yu will either be supplyin porno to france - or get a piccy of a cheese sarny.
you shd no betta
you shd no betta
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
well thats weird!!!!!!!!!!!!!
a **** load of posts have appeared that wint here before hand..
marcus as you've got rangie axles and as far as i know them was fitted wiff coils and yer series was/is a leafer i was interested in how the rangie axles fit on as am hopeing to bung a v8 and rangie box into one of mine. am sure the back shafts wont like it so i'm looking at putting rangie axles on.
tiyt would save a bit of time if ah could see how its done.
a **** load of posts have appeared that wint here before hand..
marcus as you've got rangie axles and as far as i know them was fitted wiff coils and yer series was/is a leafer i was interested in how the rangie axles fit on as am hopeing to bung a v8 and rangie box into one of mine. am sure the back shafts wont like it so i'm looking at putting rangie axles on.
tiyt would save a bit of time if ah could see how its done.
Grippa
New Member
- Posts
- 12,310
- Location
- Where the winches aren't.
Ahh, see what ya mean. Yeah, no prob', I'll take some & either send 'em thru MSN or PM them on here if they ain't too big (the pics, not the axles).
slob
Well-Known Member
- Posts
- 22,488
- Location
- Harrogate or London
grand ma man. should save me some beer time
- Posts
- 83,254
- Location
- Embasinga stocæ
yu're a glutton fur punishment - aint ya, Slob?
