GDM
Active Member
- Posts
- 205
- Location
- West Sussex
Could someone give me quick run through on the proceedure for replace a 300 Tdi front wheel bearing please? It's on a friends car and only have a manual for the Discovery 2.
Thanks.
Thanks.
I'm doing a similar job on my V8 but I'm having trouble with the inner nut. Nothing I have fits and I am a wee bit concerned about getting it torqued back up correctly. Can anyone advise the correct sized socket. It measures 36-37mm across the flats
GDM - I've recently been ordering parts online from Paddock Spares. . Too early to tell about quality but excellent service so far
Regarding the manual- I sourced one online (free) with a simple Google search. Sorry I can't remember the site
If you look on fleabay you will almost certainly find a socket or spnner to fit. I did a few years ago. And it should be TIGHT.
there isnt a torque setting read my post on how toYou are of course correct. However, I think 'tightened with the tips of a large pair of grips' needs a bit of help. Unfortunately I don't know the correct torque setting for the inner locknut, but I am sure you will be able to help.
You are of course correct. However, I think 'tightened with the tips of a large pair of grips' needs a bit of help. Unfortunately I don't know the correct torque setting for the inner locknut, but I am sure you will be able to help.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!