Front driving/fog lamps

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Khryztal

Khryztal

New Member
Posts
725
Location
Felcourt. Surrey
Evening all,
Just wondering if any one has any ideas on this. On my 90 model classic there are 3 fog/driving lamp switches. 1 for the rear and 2 front. 1 works (or did work) the lower valance lights. Was the other one for the rare lights that were fitted in the grill near the head lights? which i don't have. If so did the fit the wiring loom or just the switch on models without the second grill lights.
trying to find out as fitting a bonnet pod and it would be a lot easier using the wiring looms already fitted.

Grateful for any help. As really don't want to remove nudge bar, bumper and grill just yet.
 
To remove the lights. Slide under the car, You will see a 17mm nut holding the lamp in place. Spray with WD40 or similar. And use a ring spanner. Should come off. May take some force as the nutrs rust on very bloody well. I checked. I took off the valance after I hit a large mound of frozen snow.
 
It seems ridiculous to have to do all that just to change a bulb lol, such a bad design!

Apparently the glass falls out easily when they break though.
 
I found that they didnt really make a lot of difference being on or off. Wanted more ground clearance so took the whole thing off. Now I have the Bonnet pod with 4 lights so much better. Or it will be when It's wired up lol
 
You must log in or register to reply here.

Similar threads

H
Oh no! Not that old fog light question again.
Replies
14
Views
695
dag019
dag019
Swl26
Freelander 1 Driving Lamp Query
Replies
8
Views
1K
Dar ran Dar ran
Dar ran Dar ran
D
Side lights and starter post new radio instllation
Replies
7
Views
876
dag019
dag019
L
LCM recode
Replies
16
Views
2K
backinblack
backinblack
D
L320 suspension query
Replies
6
Views
505
Graculus
Graculus
Back
Top