Freelander TD4 2005

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Got some aero wiper blades today, also a set of side rubbing strips. Will fit the blades tomorrow. But had to untwist and straighten the rubbing strips. And have now clamped them between some wood to hopefully flatten them. Will leave them a week before fitting.

DSC_0529_zpspbrz50ut.jpg
 
I fit aero blades to very vehicle I own or service. They are so much nicer than traditional blades. And cheaper these day's too.

Normally the first thing I do as well, but kept saying 'I'll do it later'. :)
 
Some interesting facts. :)

Back on topic now, the Freelander is going to my brothers tomorrow to have new rear diff seals, diff mounts and the new fuel tank cradle fitted. :)

Pics of cradle, plates aren't too bad. But tubes have rotted through and split.

sketch-1488149143137_zpswtof1mgu.png


sketch-1488149070967_zpsn81lat4k.png
I've got the '55' plate. A previous owner lived in Conwy. Either the salt-air or driving on the beach meant that I had to replace the fuel tank cradle. The whole thing had rusted through. I put several coats of Hammerite Green on the new one before fitting.
 
Does anyone have cutting template for VUB500870? I just receiver kit, but package was damaged during transport one light assy and cutting template is missing..

I have RH VPL1293 pod assy with mountig plate, but other one is missing. Does anyone have serialnumber for that?

Ive got a copy of the template. :)
 
Last edited:
Back
Top