Freelander 2 Won’t Start

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
W

Webberjim

New Member
Posts
6
Hi Guys. I have a Freelander 2 Auto. Engine cut out. Was recovered home and engine wouldn’t start. RAC home-start came whilst I was out. Apparently he spent 30 seconds under the bonnet and said Cam-belt in my opinion, and then left.
When i try to start the engine, the serpentine belt and cam-belt both rotate, albeit slowly. They have both done multiple revolutions. There is a high pitch noise, from what I assume is the stater motor. This is the only noise I can hear, there is no turnover noise ( the noise the engine makes before it fires), apologies for the poor noise description!
Battery went flat after a few attempts to start but was recharged and now I’m back to just the high-pitched noise. No codes present on my diagnostic scanner. Thanks in advance for any suggestions. James.
 
Video link below. Tried to show both belts moving freely but now I’ve reviewed it I’m not so sure the sound is from the starter or not?
A little out of my depth here. Car is too good to scrap though :)

 
The squeal you can here is from the throttle body. It's very possible the gears have stripped (common) and the butterfly is closed. There's also no compression, which again suggests the throttle butterfly is in the closed position.
Hopefully that's all it is, and the timing belt hasn't jumped, which again will give no compression, but I think you're safe here.
 
Nodge68 said:
The squeal you can here is from the throttle body. It's very possible the gears have stripped (common) and the butterfly is closed. There's also no compression, which again suggests the throttle butterfly is in the closed position.
Hopefully that's all it is, and the timing belt hasn't jumped, which again will give no compression, but I think you're safe here.
Click to expand...
Thanks Nodge. I really appreciate your time and input. If the timing belt has jumped, is at potentially as bad as snapping? Ie bent valves etc? Thank You. Literally had the car for 2 weeks and paid £2.5k on a private sale, sold as seen 😩
 
Webberjim said:
Thanks Nodge. I really appreciate your time and input. If the timing belt has jumped, is at potentially as bad as snapping? Ie bent valves etc? Thank You. Literally had the car for 2 weeks and paid £2.5k on a private sale, sold as seen 😩
Click to expand...

Unfortunately if the timing belt has jumped, then some of the valves will be bent, and possibly some rockers too.

Hopefully it's the throttle body, and not a head job.
It's a long old job doing a head job on these engines, as there's mountains of stuff to remove. I know I've done it twice, and I'm now suffering from what I believe is head gasket issues, so I'm about to do mine for a 3rd time.
 
Apologies. I forgot to update you. It was the timing belt. Teeth had stripped and the belt had jumped several teeth. Car is back on the road now but not under my ownership. The guy repairing it bought the car 👍
 
Webberjim said:
Apologies. I forgot to update you. It was the timing belt. Teeth had stripped and the belt had jumped several teeth. Car is back on the road now but not under my ownership. The guy repairing it bought the car 👍
Click to expand...
Hi Jim.
Thanks for letting us know are you going to get another one ?
 
You must log in or register to reply here.

Similar threads

P
Main relay keeps clicking sound and engine wont start.
Replies
10
Views
801
Phoubles
P
H
Freelander 2 whining
Replies
2
Views
527
HWel
H
C
Noise from (possibly) LH front drive ... Freelander 2 SD4 XS
Replies
5
Views
499
chj
C
C
300TDI drive belt
Replies
3
Views
259
CRS
C
B
FL2 - Alternator belt gone but engine stopped?
Replies
16
Views
1K
pwood999
pwood999
Back
Top