Hello
I have just purchased a 2005 Freelander 1 and the parking sensors at the back do not work. I have researched through the forums and one of the suggestions was that put in reverse and listen for clicking of the sensors. This does not happen.
I have removed the side panel at the back and have a YWC500142/YMC500202 parking aid module.
There is no light on the dashboard switch and no sound. I have checked the fuse (24) and this is ok.
However, I cannot find any wiring diagrams to check the voltage outputs to see if 12v is going to the sensors. Or even input voltage to the ECU itself
Can anyone help me with the pin outs or have a wiring diagram that could assist with fault finding, or would you advise changing this part anyway.
Any suggestions most welcome
Thanks
Terry
I have just purchased a 2005 Freelander 1 and the parking sensors at the back do not work. I have researched through the forums and one of the suggestions was that put in reverse and listen for clicking of the sensors. This does not happen.
I have removed the side panel at the back and have a YWC500142/YMC500202 parking aid module.
There is no light on the dashboard switch and no sound. I have checked the fuse (24) and this is ok.
However, I cannot find any wiring diagrams to check the voltage outputs to see if 12v is going to the sensors. Or even input voltage to the ECU itself
Can anyone help me with the pin outs or have a wiring diagram that could assist with fault finding, or would you advise changing this part anyway.
Any suggestions most welcome
Thanks
Terry